JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled

SKU: jimstim-k

Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for…

-

JimStim 1.5 MegaSquirt Stimulator with Wheel Simulator – Assembled

SKU: jimstim-c

DIYAutoTune Part# JimStim-C JimStim is essentially an engine simulator, a microcontroller which allows the generates up to 30 different toothed wheel signals, in addition to the standard distributor signal. Test your RPM input on the Stim, or tell the JimStim to provide a signal like the one from a Neon, Miata, Subaru, most Fords, and…

-

JimStim CPU

SKU: JimStim-CPU

Included is the JimStim CPU. A microcontroller loaded with the latest code, currently V2.0.4.

-

JimStimX Kit – MS3X Stimulator Expansion Board – Unassembled

SKU: JimStimX-K

The regular JimStim can test the main board on your MS3. But what if you’d like to see the inputs and outputs on the MS3X expansion card in action, too? Now it’s easy – just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 volt power, ground, and cam…

-

MegaSquirt JimStim Stimulator Power Supply

SKU: StimPower

12v DC Power Supply Plugs directly into your MegaSquirt JimStim Stimulator! Power supply supports 120 to 240 volt AC power.

-

Jumper 10-Pack

SKU: jumper.1

10-pack of wire jumpers in 5 colors. These fit 0.1″ headers and are used on the JimStim to make connections for testing additional circuitry.   There are several other uses for them too.

-

Common MegaSquirt EMS Price Quotes

Common Quotes for a complete MegaSquirt System Some common price quotes for complete systems, both assembled and un-assembled in kit form.  This is to give you a rough idea and doesn’t cover all situations.  You may want to trim it down a bit, or need something else. Here’s a page with info on my recommendations…

MegaSquirt ECU Options

MegaSquirt EFI – the original, and still the best This covers the “core” MegaSquirt lineup – for other products, including MSPNP and MSPNP Pro plug and play options as well as the MS3Pro lineup, please see our “Which MegaSquirt is right for you?” page. The original MegaSquirt-I is out of production – the processor is…

Variable Resistor P3C3103-ND – Stim Pot

SKU: P3C3103-ND

Variable resistor P3C3103-ND, 10K This is the potentiometer (pot) used in the MSStim22 and JimStim kits, as well as the TransStim P1 and P2. If you need to replace a worn out one, get a new one here. Sold individually.

-

CP-102A-ND Power Jack Connector

SKU: CP-102A-ND

Replacement CP-102A-ND power jack connector. 5.5 mm OD, 2.1 mm ID. Used on the Stimulator, JimStim, and DIYPNP to connect to a power supply.

-