Cart

Quick Links

Trigger Wheels

DIYAutoTune.com presents our line of 36-1 trigger wheels for use with the Megasquirt. The trigger wheels are laser cut from 11 gauge (1/8″ steel) and work with Megasquirt-I with the MSnS-E code, and Megasquirt-II with either the standard or MS2/Extra code. Use the spacers to put the trigger wheel out in front of dish-type pulleys. We’ve tested these wheels with both GM and Ford style VR type crankshaft position sensors. V3.0 and higher boards can read the sensor output directly, while a V2.2 board requires a Ford EDIS external module or added VR conditioner circuit.

Trigger wheels and spacers are unpainted steel and can be painted or powder coated to match your engine compartment.

EPA, CARB & Emissions Disclaimer- All ECU's are for race purposes only. It's your responsibility to remain in compliance with all federal, state, provincial, or other laws that apply to you.

Showing all 7 results

  • E30 Cam Sensor Kit

    BMW E30 Camshaft Sensor Kit

     $158.99

    Have you noticed that our new E30 MSPNPPro includes both SIX discrete injector outputs and SIX discrete ignition outputs on its rear auxiliary connector? It's all ready to run your engine sequentially, just as soon as you can provide it with a camshaft po...

    Add to cart

  • 50mm/54mm Nissan Optical Trigger Wheel

     $28.99

    Convert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt-in 50mm or 54mm Nissan Trigger wheel! This replaces the stock low-resolution Nissan trigger wheel that has four slits with a higher resolution 24-2 wheel crank trigger. Intend...

    Select options
  • 36-1 Crank Trigger Wheel for use with VR or Hall Sensor

    8 1/4″ 36-1 Trigger Wheel (Slots or No Slots)

    5 out of 5
    $32.99

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) with or witho...

    Select options
  • 36-1 6.75" Trigger Wheel - Slots

    6 3/4″ 36-1 Trigger Wheel (Slots or No Slots)

    4.5 out of 5
    $31.99

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) with or witho...

    Select options
  • 36-1 4" Trigger Wheel

    4″ 36-1 Trigger Wheel (Slots or No Slots)

    5 out of 5
    $25.99

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. We offer one which is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) with or without e...

    Select options
  • Threaded Hall Effect Sensor

    Crank/Cam Position Sensor – Hall Effect Threaded Body

    4.4285714285714 out of 5
    $102.99

    This Hall Effect Crankshaft Position Sensor is designed for accurate crankshaft position detection and is suitable for a range of automotive applications. Its threaded body allows for secure installation and ensures durability in demanding environments. ...

    Add to cart
  • Hall Effect Crankshaft Position Sensor - tabbed mount

    Crank/Cam Position Sensor – Hall Effect Tab Mount

    4.9230769230769 out of 5
    $37.50

    The Crank Position Sensor with Hall Effect technology is designed for precise measurement of crankshaft position and speed. Ideal for various engine management systems, this sensor provides essential data to your ECU for accurate timing and performance op...

    Add to cart