Cart

Quick Links

ignition

Showing 1–16 of 22 results

  • Cam Sync Distributor

    $155.00

    Distributor replacement cam sync for standard deck V8 Chevy big block and small block engines. Also fits 4.3 V6. This replaces the distributor and will generate a 1X cam sync for use with EFI. It generates one 180 degree long pulse per cam revolution (som...

    Add to cart
  • LS / LSX Engine IGN1A Smart Coil Bracket Kit

    $99.00

    Bolt-on LS Ignition Coil Brackets for IGN1A Smart Coils AMPEFI Billet Aluminum IGN1A Smart Coil brackets for LS Engine Valve covers.  These are the same billet brackets used in our MaxSpark Kit allowing you to bolt a set of 8 IGN1A Ignition Coils to fac...

    Add to cart
  • LS MaxSpark IGN1A Smart Coil Wiring Harness Kit

    $250.00

    AMPEFI MaxSpark LS Engine wiring harnesses Do you already have IGN1-A Coil Packs ready to rock on your engine? Just need a quick, simple, and attractive way to hook them up? Well look no further! These harnesses are a Plug-N-Play option to finish off the...

    Add to cart
  • Magnecor KV85 LS Engine Spark Plug Wire Set for IGN1A Smart Coils

    $140.00

    Magnecor KV85 Race Spark Plug Wires for the LS Engine Custom made for our AMPEFI MaxSpark LS Engine Ignition Systems-- these Magnecor KV85 Race Spark Plug Wires for the LS Engine are just what you need if you're using our brackets and coils piecing toget...

    Add to cart
  • MaxSpark PNP – IGN1A Smart Coil Ignition Kit for 1990-2005 Mazda Miata

    5 out of 5
    $659.00

    AMP EFI put together the best and most powerful ignition upgrade kit available for your Mazda Miata, MX-5, or Eunos Roadster, and it's a complete drop-on affair.  You may have seen DIY Miata Coil on Plug conversions using other coils.  MaxSpark is next ...

    Select options
  • MaxSpark PNP LS – IGN1A Smart Coil Ignition Kit for GM LS Engines

    5 out of 5
    $899.00

    AMPEFI put together the best and most powerful ignition upgrade kit available for your GM LS engine, and it's a complete drop-on affair.  MaxSpark PNP is next level with more spark energy than the stock LS ignition coils by a longshot.  If you want more...

    Add to cart
  • AXM-120 VR conditioner

    $70.00

    Use this module to convert the sine wave signal from a VR (variable reluctor) signal into an easy to handle square wave.  The AXM-120 VR conditioner works with camshaft position, crankshaft position, vehicle speed, or similar sensors. Common uses for thi...

    Add to cart
  • AXM-110 High Voltage Isolator

    $68.99

    This module protects your engine or transmission controller from high voltage spikes being fed in through digital inputs. The AXM-110 module can take 1,500 volts peak and 33.5 volts continuous. Common uses for the AXM-110 high voltage isolator include: ...

    Add to cart
  • AXM-100 High Voltage Tach Adapter

    $65.00

    Many older tachometers trigger off the negative terminal of the ignition coil.  Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...

    Add to cart
  • IGN1A Smart Coil

    5 out of 5
    $71.00

    The IGN1A Smart Coil by AMP EFI requires no CDI Ignition Module to produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you'd see with a capacitive discharge. They are the same monster coils used in Street Outlaws No Prep Kings conten...

    Add to cart
  • Pigtail Connector for IGN1A and GM MAF Sensors

    $15.99

    4' Flying lead smart coil pigtail for IGN-1A coils.  The extra length makes these easy to bundle up into a single ignition control harness without needing splices near the coil. Power and primary ground wires are 18 gauge to better handle these coils' p...

    Add to cart
  • Crimp Connector for IGN-1A

    5 out of 5
    $5.79

    Connector for IGN-1A coils, includes crimp on terminals/pins. Like all of our 'ready to crimp' connectors- we include an extra terminal/pin, just in case.  Click here to see other ignition system components for your project!  

    Add to cart
  • QuadSpark Four Channel Ignition Module

    5 out of 5
    $104.99

    Waterproof and capable of handling plenty of current, each channel of the Quadspark Ignition Module needs a 5 volt logic level signal. Perfect for running IGN-1, IGN-1FD, IGN-4, or IGN-6 coils. Or use them with OEM distributor-less ignitions that don'...

    Add to cart
  • IGN-1 Inductive Coil

    5 out of 5
    $48.00

    Here's a hot coil at a reasonable price.  The IGN-1 shares the same internal core as an IGN-1A, but without the built-in ignitor. This can be used for distributors or coil per plug. Use with BIP373s or an external ignition module.  IGN-1 Inductive Coil ...

    Add to cart
  • IGN-1CD Capacitive Discharge Coil

    $48.00

    Here's a race coil designed for CDI applications that's small and inexpensive enough to use one per cylinder, if you're so inclined. The IGN-1CD is vibration resistant and can be mounted at any angle.  Also works with MSD, Mallory Hyfire, and other capa...

    Add to cart
  • IGN-4 Four-Tower Coil Pack

    5 out of 5
    $52.99

    The IGN-4 four tower ignition coil is an affordable option for a hot distributor-less ignition! Similar to our IGN-1A coil, but this unit  has four outputs that fire in wasted spark and does not have a built in ignitor. If used with our BIP373 ignition m...

    Add to cart