Cart

Quick Links

AXM-150 Single Channel Ignition Module
AXM-150 Single Channel Ignition Module
AXM-150 Single Channel Ignition Module

AXM-150 Single Channel Ignition Module

$70.00

-

Add to wishlist
SKU: AXM-150 Categories: , , , Tags: , , , , , , , , , , , , , , Brand:

Description

The AXM-150 Single Channel Ignition Module is the single-channel variant of our renowned 4-channel QuadSpark.

It is designed to drive a single high-current ignition coil, commonly found in conventional distributor setups, from a 5V logic-level ECU ignition output.

An additional benefit of the AXM-150 is that it allows you to bypass the stock ignition module, giving you direct control over the ignition coil dwell and spark duration.

Ideal for

Perfectly suited for use with the MS3Pro Mini when utilizing a distributor and a single dumb coil setup.

Common Use Cases

  • Single Coil Distributor Applications

Technical Details

  • Pins 1 and/or 4: Ground connection (e.g., engine cylinder head)
  • Pin 2: Receives the logic ignition signal from the ECU (Yellow Spark A wire on MS3Pro ECUs)
  • Pin 3: Drives the negative terminal of the ignition coil

AXM-150 instruction sheet

What’s in the box?

    • AXM-150 Single Channel Ignition Module
    • Amphenol AT connector
    • 5 crimp type pins
    • Instruction sheet

How big is it?

    • The AXM-150 measures 96 mm long, 40 mm wide, and 19 mm tall not including the connector (3 3/4″ long, 1 5/8″ wide, and 3/4″ tall).

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Only registered users are eligible to enter questions

Related products

  • MS3Pro EVO Uncrimped AMPSEAL Connectors

    5 out of 5
    $64.99

    Making your own harness? This plug and pin kit features the MS3Pro AMPSEAL white & gray connectors plus 75 pins- more than enough for making your own MS3Pro EVO or 1st Gen harness. MS3Pro ULTIMATE 3-connector AMPSEAL Kit available here

    Add to cart
  • AMP EFI MS3Pro Ultimate Black Center Harness Flying Lead

    MS3Pro ULTIMATE Center Harness

    5 out of 5
    $59.00

    MS3Pro ULTIMATE adds nearly 50% more I/O with the addition of a third AMPSEAL 23-pin, 8' flying lead.  Harness arrives with color-coded, printed wires per the pinout below (black center connector) ***Center Harness ONLY in this listing, intended for p...

    Add to cart
  • Resistor Pill for pull-up - 1k

    Sealed resistor – 1K

     $4.50

    We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...

    Add to cart
  • Replacement MS3-Pro fuse, 500 mA

    MS3Pro Ultimate & EVO F5 Replacement Fuse

     $3.00

    The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 6000m...

    Add to cart
  • AMPEFI QuadSpark v2.0 ISO

    QuadSpark 4-Channel Ignition Module

    5 out of 5
    $104.99 – $109.99

    Introducing the AMP EFI Quadspark Ignition Module V2 - your trusted solution for robust ignition control in high-performance applications.  We've enhanced the design featuring an upgraded design in a compact aluminum case with a DT-style connector, maint...

    Select options

  • MSPNP and DIYPNP IAT Sensor Kit – Steel Bung

    5 out of 5
    $39.99

    MegaSquirtPNP and DIYPNP IAT Temperature Sensor Kit - Steel Bung This is a simple kit to make it easier for you when removing your AFM/MAF when using a MegaSquirtPNP or DIYPNP. In many cases, the air temperature sensor is built into the MAF, so removin...

    Add to cart