Showing 1–16 of 51 results
-
Cam Sync Distributor
$155.00Distributor replacement cam sync for standard deck V8 Chevy big block and small block engines. Also fits 4.3 V6. This replaces the distributor and will generate a 1X cam sync for use with EFI. It generates one 180 degree long pulse per cam revolution (som...
Add to cart -
MaxSpark PNP – IGN1A Smart Coil Ignition Kit for 1990-2005 Mazda Miata
$659.00AMP EFI put together the best and most powerful ignition upgrade kit available for your Mazda Miata, MX-5, or Eunos Roadster, and it's a complete drop-on affair. You may have seen DIY Miata Coil on Plug conversions using other coils. MaxSpark is next ...
Select options -
MaxSpark PNP LS – IGN1A Smart Coil Ignition Kit for GM LS Engines
$899.00AMPEFI put together the best and most powerful ignition upgrade kit available for your GM LS engine, and it's a complete drop-on affair. MaxSpark PNP is next level with more spark energy than the stock LS ignition coils by a longshot. If you want more...
Add to cart -
Pigtail Connector for Chevrolet Cam Sync Distributor
$12.00Connector with 8 inches of wiring for Chevrolet Cam Sync Distributor.
Add to cart -
Ford Mustang 1996-1998 MS3Pro PNP Plug and Play
$1,499.99Mustang GT 1996-98, 96-98 NA Cobra -- Get your car truly 'RACE-READY' with MS3Pro Plug & Play! This ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost and is CAN enabled for seamless control of other MegaSquirt or ...
Add to cart -
AXM-120 VR conditioner
$70.00Use this module to convert the sine wave signal from a VR (variable reluctor) signal into an easy to handle square wave. The AXM-120 VR conditioner works with camshaft position, crankshaft position, vehicle speed, or similar sensors. Common uses for thi...
Add to cart -
AXM-110 High Voltage Isolator
$68.99This module protects your engine or transmission controller from high voltage spikes being fed in through digital inputs. The AXM-110 module can take 1,500 volts peak and 33.5 volts continuous. Common uses for the AXM-110 high voltage isolator include: ...
Add to cart -
AXM-100 High Voltage Tach Adapter
$65.00Many older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cart -
Ford Mustang Terminator Cobra SVT 2003-2004 MS3Pro PNP Plug and Play
$1,499.99Ford Mustang Terminator Cobra (2003-2004) Engine Management System. Make it 'RACE-READY' with MS3Pro Plug & Play! This Mustang Cobra ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost, controls your factory dashbo...
Add to cart -
Ford New Edge Mustang 1999-2004 MS3Pro PNP Plug and Play
$1,499.99New Edge Mustang GT 1999-2004, 99-02 NA Cobra or 03-04 Mach1 owners-- Get your car truly 'RACE-READY' with MS3Pro Plug & Play! This ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost and is CAN enabled for seamless...
Add to cart -
MS3Pro EVO Wiring Harness – Universal Flying Lead
$299.00MS3Pro EVO Complete 8' Flying Lead Harness Only (White & Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.
Add to cart -
MS3Pro ULTIMATE Wiring Harness – Universal Flying Lead
$349.00MS3Pro ULTIMATE Complete 8' Flying Lead Harness Only (White-Black-Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.
Add to cart -
MS3Pro ULTIMATE Center Harness
$59.00MS3Pro ULTIMATE adds nearly 50% more I/O with the addition of a third AMPSEAL 23-pin, 8' flying lead. Harness arrives with color-coded, printed wires per the pinout below (black center connector) ***Center Harness ONLY in this listing, intended for p...
Add to cart -
MS3Pro ULTIMATE Uncrimped AMPSEAL Connectors
$89.99Planning to make your own ULTIMATE harness? This plug and pin kit features the MS3Pro ULTIMATE AMPSEAL white, black & gray connectors, plus 100 pins- more than enough for making your own! (EVO/ 1st Gen 2-connector AMPSEAL Kit sold separately)
Add to cart -
MS3Pro 1st Gen Wiring Harness Upgrade (for ULTIMATE and EVO)
$23.99If you have a previously installed MS3Pro harness (1st Gen flying lead or LS Drop On Harness) and want to upgrade to MS3Pro EVO or ULTIMATE ECU, the upgrade path is simple. However, complete functionality will require a few basic changes to your 1st Ge...
Add to cart
