Showing 1–16 of 41 results
-
Cam Sync Distributor
$155.00Distributor replacement cam sync for standard deck V8 Chevy big block and small block engines. Also fits 4.3 V6. This replaces the distributor and will generate a 1X cam sync for use with EFI. It generates one 180 degree long pulse per cam revolution (som...
Add to cart -
Ford Mustang 1996-1998 MS3Pro PNP Plug and Play
$1,499.99Mustang GT 1996-98, 96-98 NA Cobra -- Get your car truly 'RACE-READY' with MS3Pro Plug & Play! This ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost and is CAN enabled for seamless control of other MegaSquirt or ...
Add to cart -
Ford Mustang Terminator Cobra SVT 2003-2004 MS3Pro PNP Plug and Play
$1,499.99Ford Mustang Terminator Cobra (2003-2004) Engine Management System. Make it 'RACE-READY' with MS3Pro Plug & Play! This Mustang Cobra ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost, controls your factory dashbo...
Add to cart -
Ford New Edge Mustang 1999-2004 MS3Pro PNP Plug and Play
$1,499.99New Edge Mustang GT 1999-2004, 1999-2002 NA Cobra or 2003-2004 Mach1 owners-- Get your car truly 'RACE-READY' with MS3Pro Plug & Play! This ECU installs in less than an hour, arrives out-of-the-box ready for up to 44lbs boost and is CAN enabled for ...
Add to cart -
MS3Pro Module F1/F2 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cart -
MS3Pro Ultimate & EVO F5 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 6000m...
Add to cart -
MS3Pro Gen1 F1/F2 & MS3Pro EVO F4 Replacement Fuse
$2.25The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cart -
MS3Pro EVO Wiring Harness – Universal Flying Lead
$299.00MS3Pro EVO Complete 8' Flying Lead Harness Only (White & Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.
Add to cart -
MS3Pro ULTIMATE Wiring Harness – Universal Flying Lead
$349.00MS3Pro ULTIMATE Complete 8' Flying Lead Harness Only (White-Black-Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.
Add to cart -
MS3Pro ULTIMATE Center Harness
$59.00MS3Pro ULTIMATE adds nearly 50% more I/O with the addition of a third AMPSEAL 23-pin, 8' flying lead. Harness arrives with color-coded, printed wires per the pinout below (black center connector) ***Center Harness ONLY in this listing, intended for p...
Add to cart -
MS3Pro EVO Uncrimped AMPSEAL Connectors
$64.99Making your own harness? This plug and pin kit features the MS3Pro AMPSEAL white & gray connectors plus 75 pins- more than enough for making your own MS3Pro EVO or 1st Gen harness. MS3Pro ULTIMATE 3-connector AMPSEAL Kit available here
Add to cart -
MS3Pro ULTIMATE Uncrimped AMPSEAL Connectors
$89.99Planning to make your own ULTIMATE harness? This plug and pin kit features the MS3Pro ULTIMATE AMPSEAL white, black & gray connectors, plus 100 pins- more than enough for making your own! (EVO/ 1st Gen 2-connector AMPSEAL Kit sold separately)
Add to cart -
MS3Pro 1st Gen Wiring Harness Upgrade (for ULTIMATE and EVO)
$23.99If you have a previously installed MS3Pro harness (1st Gen flying lead or LS Drop On Harness) and want to upgrade to MS3Pro EVO or ULTIMATE ECU, the upgrade path is simple. However, complete functionality will require a few basic changes to your 1st Ge...
Add to cart -
Sealed resistor – 10K
$4.50We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cart -
Sealed resistor – 1K
$4.50We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...
Add to cart -
Refurbished MS3Pro ULTIMATE Standalone ECU
$1,318.99While supplies last, Refurbished MS3Pro ULTIMATE standalone ECU with TunerStudio license, documentation & installation files via USB drive. Choose from the following options: Refurbished MS3Pro ULTIMATE ECU only Include an ampseal connector ...
Add to cart