Crankshaft / Camshaft Position Sensor – Hall Effect tab mount

SKU: HallSensor

Crank Position Sensor – Hall Effect tab mount Hall effect crank position sensor (or camshaft position sensor, or wheelspeed, or driveshaft speed, anything that spins!). We’ve tested this with our 6.75″ and 8.25″ trigger wheels. We were able to get a rock solid reading at over 19,200 RPM, which is as fast as our test…

-

Speed Week 2008 at Bonneville Speedway

Turns out this was the year for Gary to break the record.  Twice.  In car video of the record run is below. Monday Monday morning Gary pulled a 236mph ‘down run’ to qualify for the record, motor was running great, we put the car in impound until Tuesday morning when we’d come back to try…

Bosch LSU 4.9 5-wire wide-band O2 sensor – 38880

SKU: INNVT-3888

3888Bosch LSU 4.9 5-wire, wide-band O2 sensor. Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1. NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector is different for each sensor. Reference the Sensor/ Sensor cable identifier image below. Another way…

-

Weather Pack 6 Position, 16-14 Gauge (3) Pack

SKU: WP6B3-K

(3) 6 position  weather pack sets, including: (3) male and female connectors (19) male and female 16-14 gauge pins (38) 16-14 gauge seals

-

Weather Pack Bulkhead Connector Kit

SKU: WP22M-K

Use this giant 22 Position Weather Pack connector to run wires through a firewall or as a quick disconnect for your engine harness, or other components that need a lot of wires. Includes: (1) 22 position male and female connector (13) 20-18 gauge male and female pins (13) 16-14 gauge male and female pins (4)…

-

Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge

SKU: T-3138CT

We’ve tracked down a source for a reliable, yet affordable, crimper for the Weather Pack connectors.  This crimper is American made and truly creates a perfect crimp every time, without the price tag you’d usually pay for a Delphi 12014254 crimper. This tool crimps the SEAL and the TERMINAL in a single process. It’s almost…

-

Transistor Replacement 2 – Pack TIP125TU-ND

SKU: rp-msx30-28

2 pack of TIP125TU-ND transistors MSx30 Q9 and Q12 These are part of the flyback circuit on the V3.0 and V3.57 boards. The V2.2 flyback board also uses these, and it replaces the TIP125 high side driver on the DIYPNP V1.5 board as well.

-