Cart

Quick Links

Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge

Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge

5 out of 5 based on 6 customer ratings
(6 customer reviews )

$108.00

In stock

SKU: T-3138CT Categories: ,

Description

We’ve tracked down a source for a reliable, yet affordable, crimper for the Weather Pack connectors.  This crimper is American made and truly creates a perfect crimp every time, without the price tag you’d usually pay for a Delphi 12014254 crimper.

This tool crimps the SEAL and the TERMINAL in a single process.

It’s almost identical to the Delphi tool except the price.  Works for 20 to 14 gauge wire, and has a handy plastic block to hold the pins while you make the crimp.

*Please note that this tool is not eligible for return once the box is opened.

Customer reviews

Rated 5 out of 5 stars
6 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

6 reviews for Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge

  1. 5 out of 5

    Working well for Traction Control and VSS. Going to try for Crank signal now.I have 2 of these already on the vehicle. One at the rear end pinion for VSS1 running on a 4 magnet wheel and one on the front hub reading the heads of the lug studs (6 lugs). Both are working well. I am going to try one on the front of the crank with a 36-1 wheel. I bought 2, one to keep as a spare, since I now have 3 on the vehicle.

    Was this review helpful to you? 0 of 0 people found this review helpful

  2. 5 out of 5

    Well made, machines easily.Picture is very accurate. It machines easily and is well made. Should be a good improvement over my 8 window stock trigger.

    Was this review helpful to you? 0 of 0 people found this review helpful

  3. 5 out of 5

    Hall Effect Crankshaft Position SensorI bought this item, it's not dirt cheap to me. But, I purchased it. Using it with ms2 extra. Had to do few steps, solder few wires to make it work. Instructions online available step by step. It was easy enough and the felling was rewarding that I did it. The sensor works beautifully, it does the job very nicely, so far I have no complains. Would say much sharper than the pickup sensor for sure. (Project: rotary engine Rx7) thanks diyautotune.

    Was this review helpful to you? 0 of 0 people found this review helpful

  4. 5 out of 5

    Excellent kit
    Fast Shipping
    Great support

    Was this review helpful to you? 0 of 0 people found this review helpful

  5. 5 out of 5

    The better solutionsRobert,from Italy,
    This is the better ,cheapiest solution to drive a Classic europea 4 cylinder engine.
    I install on Classic Opel,20xe,16 e .
    Have about 20 cars runs MS 2, and some of that runs micro,the quickest solutions.
    Thanks DIY,Good device,hope it test cheap!!!

    Was this review helpful to you? 0 of 0 people found this review helpful

Add a review

Does this tool crimp both the pin and seal at the same time?

  • Yes!  This is a great crimp tool.  It crimps both the terminal and the seal in one pass.

Where is this tool made?

  • It is made in the USA.

Questions & Answers