Search Results for: coil
DIYPNP Upgrade: BIP373 Ignition Module and Heat Sink Kit
SKU: DP_BIP373-K
$12.00
Add a BIP373 Ignition Module with Heat Sink to your DIYPNP EMS to directly fire coils that do not have their own internal ignitor. This will allow you to convert vehicles that came with a single coil ignition system and distributor over to modern day coil-per-plug or wasted spark ignition fired directly from the ECU! The DIYPNP…
View Details-
Read moreDIYPNP Upgrade: Ignition Module and Heat Sink Kit
SKU: DP-CoilDrvr
$12.00
High current ignition driver kit with heatsink designed for the DIYPNP ECU. It includes the OnSemi EcoSPARK IGBT. This is the same high current ignition driver as used in many of our current ECU products as well as the QuadSpark ignition module, after Bosch discontinued the now infamous BIP373. Our testing has found that this…
View Details-
Add to cartQuadSpark Four Channel Ignition Module
SKU: QuadSpark
$104.99
Waterproof and capable of handling plenty of current, Quadspark makes an ideal ignition module for up to 4 coils. We have moved to Ecospark IGBTs for the main drivers, as Bosch no longer supplies BIP373 drivers. Each of the 4 channels can act independently. When a channel input is triggered by 5V, the output goes…
View Details-
Add to cartCrimp Connector for IGN-1 or IGN-1CD
SKU: IGN-1CD_WPK
$7.29
Metri-Pack crimp connector for wiring up IGN-1 or IGN-1CD coils. Like all of our ‘ready to crimp’ connectors- we include an extra terminal/pin, just in case you goof one up.
View Details-
Add to cartCrimp Connector for IGN-6
SKU: IGN-6_WPK
$5.99
Included is a Weather Pack type connector for IGN-6 coils. The pins and seals are sized for 14 to 16 gauge wire. Like our other DIYAutoTune Weather Packs, we include an extra pin, just in case.
View Details-
Add to cartCrimp Connector for IGN-4
SKU: IGN-4_wpk
$13.49
Crimp connector and pins for IGN-4 coil. This is a standard “junior timer” sort of connector that has other uses such as Bosch crankshaft position sensors and throttle position sensors. Like all of our ‘ready to crimp’ connectors, we include an extra terminal/pin, just in case.
View Details-
Add to cartAXM-100 High Voltage Tach Adapter
SKU: AXM-100
$65.00
The AXM-100 high voltage tach adapter lets you control tachometers that trigger off the negative terminal of the coil with a low voltage signal from your ECU.
View Details-
Add to cartGray Pigtail for Ford TFI Ignitions
SKU: PC-2832F
$15.00
Gray connector fits certain Ford TFI systems. We’ve confirmed this was used on certain 5.0 Mustangs among other applications. It also appears to fit some neutral safety switches and distributorless ignitions. Note that the gray color is not purely a cosmetic difference; this one is keyed differently from the black connector that we also sell.…
View Details-
Add to cart5 Wire Pigtail for GM DIS Modules
SKU: PC-2893F
$22.00
This pigtail connector fits some GM OBD-I external DIS modules, including most 1995 and earlier Saturns. Check your module for the “missing pin” position to make sure this is the right one for your module. Replaces GM part number 12101880
View Details-
Add to cartMegaSquirt 3 ECU with MS3X Expansion
SKU: MS3X357-C
$699.99
Important Note: Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures. We appreciate your understanding. The MegaSquirt 3 with MS3X expansion arrives equipped with features surpassing MS2 & MS1 systems, like sequential fuel & spark, 2 step, progressive nitrous, boost…
View Details-
Add to cart