$6.99
Metri-Pack crimp connector for wiring up IGN-1 or IGN-1CD coils.
Like all of our ‘ready to crimp’ connectors- we include an extra terminal/pin, just in case you goof one up.
Only logged in customers who have purchased this product may write a review.
Here's a hot coil at a reasonable price. The IGN-1 shares the same internal core as an IGN-1A, but without the built-in ignitor. This can be used for distributors or coil per plug. Use with BIP373s or an external ignition module. IGN-1 Inductive Coil ...
Add to cart
The IGN-6 'wasted spark' style coil pack at a glance could be mistaken for a stock Chrysler ignition coil, perhaps off of a Dodge Intrepid, but it's not. Though it appears to be molded from the same tooling used to make stock replacement coils for some Mo...
Add to cart
Weatherpack style connector for GM boost control solenoid. This connector comes with crimp-on pins to keep the number of splices in your wiring harness to a minimum.Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC ...
Add to cart
Sealed connector for GM boost control solenoid. This connector is pre-crimped with a 6" pigtail.Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC Solenoid. We continue to offer these connectors for customers that ne...
Add to cart
150 amp circuit breaker. This is a sealed, marine grade unit with a reset lever. 3/8" lugs for ring terminal attachments. Manual trip/reset lets you activate the breaker with the blue push button. Maximum voltage 48 volts DC. Made in the USA.
Add to cart
TPS-3 Connector (Uncrimped)GM Style 3-pin TPS Connector complete with:the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cart
Reviews
There are no reviews yet.