MicroSquirt with 8′ Harness

SKU: MicroSqrt8

The versatile MicroSquirt with 8′ Harness: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module- Version 3.0 MicroSquirt with 8′ Harness is an entry-level, fully assembled ECU and universal 30″ pigtail with varied applications targeting power sports, single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark…

-

DIYAutoTune Hall Effect Sensors

DIYAutoTune.com has sold several Hall effect sensors. Select your sensor from the list below to see the specifications for your sensor. Tabbed Mount Sensor New (Red Body) Threaded Sensor Old (Silver Body) Threaded Sensor Tabbed Mount Sensor Runs off 5 to 24 volts, and gives a nice square wave so there’s no variable voltage issues.…

MegaSquirt 2 Standalone EMS – MS2 Extra

SKU: MS2357-C

Important Note:  Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning the enclosure used with our MS2 ECUs.    Your MS2 will now be built using the MS3 enclosure, which will help facilitate potential future upgrades from MS2 to MS3 without extra cost.  The…

-

BMW E36 328i/M3 1996-1999, E36/7 Z3/Z3M 1997-2000 MS3Pro PNP Plug and Play EcU

SKU: MSPNPPro-E369699

MS3Pro Plug and Play for 1996-1999 BMW M3 E36 Replace your “Siemens MS41” DME with a tunable racing ECU! MS3Pro Plug and Play for 1996-1999 BMW M3 E36 and 1997-2000 BMW Z3M allows tuning your E36/7 with a laptop to handle any mods you can throw at these engines! MS3Pro Plug and Play for 1996-1999…

-

AMP’d MicroSquirt without harness

SKU: MicroSqrtAMPd

  This is the latest version of the MicroSquirt, only from AMP EFI and our dealers! The AMP’d MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switches that activate on-board pullup resistors for applications that use hall or optical style crank and cam sensors.…

-

AMP’d MicroSquirt with 30″ Harness

SKU: MicroSqrtAMPd-3

  This is the latest version of the MicroSquirt, only from AMP EFI and our dealers! The AMP’d MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switches that activate on-board pullup resistors for applications that use hall or optical style crank and cam sensors.…

-

AXM-120 VR conditioner

SKU: AXM-120

The AXM-120 VR conditioner converts sine wave signals from a variable reluctor sensor into an easy to process square wave for your engine management or data logger.

-

AMP’d MicroSquirt with 8′ Harness

SKU: MicroSqrtAMPd-8

  This is the latest version of the MicroSquirt, only from AMP EFI and our dealers! The AMP’d MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switches that activate on-board pullup resistors for applications that use hall or optical style crank and cam sensors.…

-

MegaSquirt-III MS3X Expansion Card & Connector Kit

SKU: MS3Xpander

Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs to the MS3 ECU: 8 Sequential fuel injection outputs. Each can…

-

MegaSquirt-3 with PCB V3.0 Kit

SKU: MS330-K

Included is a MegaSquirt-III Engine Management System w/PCB3.0 – Unassembled Kit Part # MS330-K This MS330-K kit includes everything you will need to build your MegaSquirt-3. The genuine B&G partial kit with V3.0 PCB, everything in the standard Bill Of Materials, the MS3 daughter board kit, the case, pre-machined endplates and heatsink bar, even the…

-