DIYAutoTune’s Land Speed Nissan 240SX Project

Find out the latest on our Land Speed Racing adventures at the Ohio Mile and the Bonneville Salt Flats! Why Land Speed Racing? And how did we pick the Nissan 240sx? Since 2006 I’ve been to Speedweek on the Bonneville Salt Flats every years sans one. Each year I’ve (Jerry Hoffmann) gone out there I’ve…

MegaSquirt Your Nissan 240 / 240sx / Silvia with KA24 & SR20

Nissan / Datsun

How to MegaSquirt your Nissan 240sx   MegaSquirt your KA Powered S13 or S14, or use this article for your KA Pickup as well! How to MegaSquirt your 1982-1983 280ZX Turbo  Newer article that I’ll be polishing up and adding too but it’s got a good start! How to MegaSquirt your Nissan Skyline RB25DET  Also works…

Using DIYAutoTune.com’s Nissan Optical Trigger Discs

Converting your Nissan distributor to a more MegaSquirt friendly design Many Nissans used a distributor or CAS with a set of four or six inner slits and 360 outer slits. Current MS3 firmware supports the SR20DET, RB series, and VG30DE/DETT trigger wheels, but MS1 and MS2 are only able to use this type of trigger…

Using DIYAutoTune.com’s Revised Pattern Nissan Optical Trigger Discs

Converting your Nissan distributor to a more MegaSquirt friendly design Many Nissans used a distributor or CAS with a set of four or six inner slits and 360 outer slits. Current MS3 firmware supports the SR20DET, RB series, and VG30DE/DETT trigger wheels, but MS1 and MS2 are only able to use this type of trigger…

Land Speed Nissan 240sx Sponsors

IGN-6 Six-Tower Coil Pack

SKU: IGN-6

The IGN-6 ‘wasted spark’ style coil pack at a glance could be mistaken for a stock Chrysler ignition coil, perhaps off of a Dodge Intrepid, but it’s not. Though it appears to be molded from the same tooling used to make stock replacement coils for some Mopar products, and would bolt right up to many…

-

Bosch 72 lb/hr High Impedance Injector

SKU: INJ_Bosch72

Modified Bosch/Ford 72 lb/hr injectors. These have a 60 mm O-ring to O-ring length and 14 mm O-rings for fitting most American V8s, as well as many other German and domestic applications. These injectors are enough to feed 110 hp per injector, naturally aspirated. They use EV6 connectors, so 5.0 Mustangs, Chevy TPI motors, and…

-

Bosch 52 lb/hr High Impedance Injector

SKU: INJ_Bosch52

Modified Bosch/Ford injectors. These have a 60 mm length and 14 mm O-rings for fitting most American V8s, as well as many other German and domestic applications. These injectors are enough to feed 80 hp per injector, naturally aspirated. They use EV6 connectors, so 5.0 Mustangs, Chevy TPI motors, and some others will need adapters…

-

1200cc Fuel Injector – High Impedance 14mm

SKU: INJ_2JZSWIFT

1200cc Fuel Injector – 14mm, Saturated/high impedance   1200cc high impedance injectors. These are 60mm long with a 14mm O-ring. EV1 style connector. Fits many domestic applications. We’re also using them on our 2JZ powered land speed 240sx, which is running a Swift Racing manifold – these will not fit stock 2JZ intakes. Some engines…

-