Search Results for: crank sensor
DIYPNP Documentation for 1990-1992 Ford Probe
1990-1992 Ford Probe USDM 2.2L F2T MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1991 Mazda MX6 2.2L Turbo with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. Other notes: AFM Removed What to buy:…
Read MoreHow to MegaSquirt Your Modular Motor Powered Mustang
Applications: 1996-2004 Mustangs with the 4.6 modular motor. We’ll also have a couple tips on other vehicles with the 4.6 and 5.4 liter mod motor V8s; the modifications are about the same if you’re working with a Thunderbird, Navigator, Crown Victoria, Lightning, or F150 as well. These motors all use the same sort of crank…
Read MoreUPGRADE: MicroSQUIRT to MS3Pro Mini
You may have noticed that the new MS3Pro Mini connector bears a striking resemblance to the connector on your older Microsquirt unit. This similarity is not coincidental; it’s intentional. You’re correct in thinking that you can repin your current harness connector, replace the Microsquirt, and install the MS3Pro Mini as an upgrade. Here’s a guide…
Read MoreDIYPNP Documentation for 1993-1994 Mazda MX6
1993-1994 Mazda MX6 USDM 2.5L KLDE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1993 Ford Probe 2.5L with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. Other notes: MAF in place Aftermarket turbo kit…
Read MoreDIYPNP Documentation for 1992-1995 Honda Civic
1992-1995 Honda Civic USDM D16Z6 MT Test Vehicle Details: The vehicle used for drawing up these application docs was a 95K original mile USDM 1995 Honda Civic EX coupe with the D16Z6 motor. All factory electronics/ignition system components are in place and the factory wiring harness is in good condition. This car is stock except…
Read MoreDIYPNP Documentation for 1993-1994 Ford Probe
1993-1994 Ford Probe USDM 2.5L KLDE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1993 Ford Probe 2.5L with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. Other notes: MAF in place Aftermarket turbo kit…
Read MoreDIYPNP Documentation for 1991 – 1992 Mitsubishi Galant VR4
NOTE: The DIYPNPN52-K Kit has been discontinued as of 8/30/18. 1991 – 1992 Mitsubishi Galant VR4 Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1992 Mitsubishi Galant VR4. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. Other notes: Stock air…
Read More
Using the Tooth Logger and Composite Logger
The tooth logger and composite logger TunerStudio’s tooth logger and composite logger are powerful tools for troubleshooting problems with the MegaSquirt’s RPM input. These are both under the Diagnostic and High Speed Loggers menu. The tooth log records the time between individual pulses from the crankshaft position sensor. The composite log works similarly to a…
Read MoreDialing in the MegaSquirt Startup Sequence
So, you’ve just installed a MegaSquirt, and are having trouble getting the engine started? With MegaSquirt, or any standalone engine management system for that matter, the startup sequence is something that needs to be tuned for your engine. The MS2/Extra and MS3 code have default maps that are often pretty close to what many engines…
Read MoreMegaSquirt Carb to EFI Conversion – Part 1: TBI Fuel Only
From Carb to EFI on just a fistful of dollars… Updated 3/3/09 – Added dyno chart showing comparison of readings taken on old vs new dyno. Objective of this Article This article will walk you through the process of installing a MegaSquirt EFI system on a classic carb’d vehicle attempting to go the least expensive…
Read More