Search Results for: crank sensor
Installing a DIYAutoTune.com Crank Trigger
This article covers how to install the DIYAutoTune.com trigger wheels. You can use a variety of sensors with these; we’ve tested them with both Ford and GM VR sensor pickups. We recommend mounting the trigger wheel in the same orientation that Ford used on their EDIS installations when using these trigger wheels on a 4,…
Read MoreDIYPNP Documentation for 1985-1989 Toyota MR2
1985-1989 Toyota MR2 (AW11) USDM 4AGE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a 58K original mile USDM 1986 Toyota MR2 with 4AGE Motor. All factory electronics/ignition system components are in place and the factory wiring harness is in perfect condition. This car has been turbocharged, the injectors…
Read MoreDIYPNP Documentation for 1985-1989 Toyota Corolla
1985-1989 Toyota Corolla (AE82 FX16, AE86, and AE92) USDM 4AGE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a 58K original mile USDM 1986 Toyota MR2 with 4AGE Motor. No it wasn’t a Corolla, but the motor and wiring harness are identical making it a good test vehicle. …
Read MoreDIYPNP Documentation for 1987-1988 Porsche 944S
NOTE: The DIYPNPB55-K Kit has been discontinued as of 8/30/18. 1987-1988 Porsche 944S USDM 2.5L MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1988 Porsche 944S 2.5L with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. …
Read MoreDIYPNP Documentation for 1987-1992 BMW 325 (v2 template)
NOTE: The DIYPNPB55-K Kit has been discontinued as of 8/30/18. 1987-1992 BMW 325 USDM 2.5L M20B25 MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1987 BMW 325is 2.5L M20B25 with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in…
Read MoreDIYPNP Documentation for 1991 – 1994 Nissan Sentra
1991 – 1994 Nissan Sentra USDM 1.6L GA16DE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1994 Nissan Sentra GA16 with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in perfect condition. Other notes: GM open element…
Read MoreHow to use a GM TBI adapter board
Updated 1/23/2008 What does this board do? GM TBI adapter board (currently available in bare PCB form) allows you to install MegaSquirt into GM trucks with the ECM part number 1227747 and cars with ECM part number 122746. Some examples include full size trucks from 1988 to 1992 with the 4.3 V6, 5.0 or 5.7…
Read MoreDIYPNP Documentation for 1996-1997 Mazda Miata
1996-1997 Mazda Miata USDM 1.8L BP MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1997 Mazda Miata 1.8L with a manual transmission. All factory electronics/ignition system components are in place and the factory wiring harness is in satisfactory condition. Other notes: MAF in place What to…
Read MoreDIYPNP Documentation for 1986-1988 Toyota Pickup
1986-1988 Toyota Pickup and Land Cruiser 22R-TE USDM Manual transmission Big thanks to Ron Marlett, who sent us this one’s spreadsheet and startup map to make available to fellow 22R-TE enthusiasts. For more details on Ron’s setup, see this thread on the 22R-TE forums. Test Vehicle Details: The vehicle used for drawing up these application…
Read MoreDIYPNP Documentation for 1985-1986 Toyota Supra
NOTE: The DIYPNPN52-K Kit has been discontinued as of 8/30/18. (If you found this page looking for our JZA80 MK4 Supra 2JZ Plug and Play PNP ECUs– click here!) 1985-1986 Toyota Supra USDM 5MGE MT Test Vehicle Details: The vehicle used for drawing up these application docs was a USDM 1983 Toyota Supra. The wiring…
Read More