Search Results for: coil
IGN-1 Inductive Coil
SKU: IGN-1
$48.00
Here’s a hot coil at a reasonable price. The IGN-1 shares the same internal core as an IGN-1A, but without the built-in ignitor. This can be used for distributors or coil per plug. Use with BIP373s or an external ignition module. IGN-1 Inductive Coil is vibration resistant, can be mounted at any angle and is…
View Details-
Add to cartPigtail Connector for IGN1A and GM MAF Sensors
SKU: IGN1A_Piggy
$15.99
4′ Flying lead smart coil pigtail for IGN-1A coils. The extra length makes these easy to bundle up into a single ignition control harness without needing splices near the coil. Power and primary ground wires are 18 gauge to better handle these coils’ power requirements; all other wires are 20 gauge. Our IGN-1A pigtail uses a…
View Details-
Add to cartCrimp Connector for IGN-1A
SKU: IGN-1A_Conn
$5.79
Connector for IGN-1A coils, includes crimp on terminals/pins. Like all of our ‘ready to crimp’ connectors- we include an extra terminal/pin, just in case. Click here to see other ignition system components for your project!
View Details-
Add to cart4 Wire Pigtail for Ford MAF/MAP/Coils
SKU: PC-2899F
$12.99
4 wire pigtail connector that fits a variety of Ford applications. This connector has been used on many Ford 4 wire MAF sensors from 1984 through the mid 1990s, certain MAP sensors, and many 6 cylinder distributorless ignition coils including EDIS applications. Note that not all Ford six cylinder coil packs or MAFs used this…
View Details-
Add to cartBosch BIP373 Coil Driver Mod Kit
SKU: MK-BIP373
$10.00
Note: This has been replaced by our Coil Driver Kit. The power transistor that Bosch uses in their own ECUs is now available to you! This is a ‘mod kit’ for installing a BIP373 in a Megasquirt, or replacing an older or damaged VB921 with the much improved BIP373. This kit includes a Bosch BIP373, mica…
View Details-
Read moreReplacement BIP373 Coil Driver (Q16)
SKU: rp-msx30-29
$7.50
This is the Bosch BIP373 coil driver triple darlington on its own. If replacing a VB921, you must use a mica insulator. For a BIP373 packaged with a mica insulator, or more information on BIP373s, please see our BIP373 mod kit.
View Details-
Read moreCoil Driver Kit
SKU: MK-CoilDrvr
$10.99
Note: This part supersedes the Bosch BIP373. OnSemi EcoSPARK IGBT, perfect for use as a high current ignition driver and can be used as Q16 in your v3.57 or v3.0 MegaSquirt build. This is the same high current ignition driver as used in many of our current ECU products as well as the QuadSpark ignition…
View Details-
Add to cartIgnition Coil Pigtail for Ford TFI
SKU: PC-2830F
$11.00
This pigtail has 10″ leads and fits Ford TFI ignition coils. Used on 5.0 Mustangs, injected 351 Windsor motors, the 2.3 Turbo, various incarnations of the 3.8 V6, and many others. Just the thing if you’re making a new wiring harness for your 5.0 or other Ford motor and need new connectors.
View Details-
Add to cartDIYPNP Replacement Coil Driver Heat Sink
SKU: HS104-1-ND
$2.00
TO-220 heat sink as used on coil drivers for the DIYPNP. V1.1 DIYPNPs also used these for the voltage regulator, boost control, and a few other functions.
View Details-
Add to cartMagnecor KV85 LS Engine Spark Plug Wire Set for IGN1A Smart Coils
SKU: SPW-LSX
$140.00
Magnecor KV85 Race Spark Plug Wires for the LS Engine Custom made for our AMPEFI MaxSpark LS Engine Ignition Systems– these Magnecor KV85 Race Spark Plug Wires for the LS Engine are just what you need if you’re using our brackets and coils piecing together your own kit, or if you’re using our MaxSpark PNP…
View Details-
Add to cart