Search Results for: coil
DIYPNP Main Board Assembly
First, you will want to decide which components you will be using, as not all installations need all components. Here is a list of what parts go with what circuit. Note that U3 is used for multiple circuits, and must be installed for any of the circuits to work. There are a couple parts that…
Read MoreMain Board Assembly
First, you will want to decide which components you will be using, as not all installations need all components. Here is a list of what parts go with what circuit. Note that U3 is used for multiple circuits, and must be installed for any of the circuits to work. There are a couple parts that…
Read MoreHow to use a GM TBI adapter board
Updated 1/23/2008 What does this board do? GM TBI adapter board (currently available in bare PCB form) allows you to install MegaSquirt into GM trucks with the ECM part number 1227747 and cars with ECM part number 122746. Some examples include full size trucks from 1988 to 1992 with the 4.3 V6, 5.0 or 5.7…
Read MoreWill the MegaSquirt work with my stock ignition system?
Last Updated: 2/4/2015 Table of Contents Fuel-Only Implementations Fuel and Spark Control: Standard Distributor Based Ignition Systems Fuel and Spark Control: Other Distributor Based Ignition Systems Going Distributorless: Stock Vehicles with the Ford EDIS or GM DIS Ignition systems Going Distributor-less: Wasted Spark and Coil On Plug (COP) Systems Going Distributorless: Wasted Spark Conversion the…
Read MoreMegaSquirt Carb to EFI Conversion – Part 2: Ignition Control
From Carb to EFI, with Ignition Control, on just a fistful of dollars… Objective of this Article This article will walk you through the process of installing a MegaSquirt EFI system on a classic carb’d vehicle attempting to go the least expensive route possible using junkyard parts and DIY ingenuity. We’ll be using an MegaSquirt-II…
Read MoreMegaSquirt Information And Technical Help
Note– these are here to help guide you and provide information. As with anything involving electronics, computers, and cars bad things can happen without proper research and planning. Do your homework. We cannot be responsible for any of your actions or their results whether based on this information or not. Be smart, and be safe……
Read MoreHow to Use a GM TPI MegaSquirt Adapter Board
If you haven’t already, please read the ‘disclaimer’ at the top of the parent page here. Updated 6/16/2008 Note: This board has been discontinued. We are keeping this page up for legacy support. What does this board do? Marc Piccioni’s new TPI adapter board works with 1986 to 1989 Corvettes, Firebirds, and Camaros with the…
Read MoreHow to Use a BMW Motronic 55 Pin Adapter Board
If you haven’t already, please read the ‘disclaimer’ at the top of the parent page here. Updated 2/5/2008 Warning: This document is a work in progress. It is not complete, and some of the directions are filler text from other products. Do not use this article until it is complete! What does this board do?…
Read MoreHow to MegaSquirt Your Ford Zetec Engine
How to MegaSquirt your Ford Zetec Engine If you haven’t already, please read the ‘disclaimer’ at the top of the parent page here. Updated 6/1/2018: MS3 and variable cam timing added Applications: This works for the 2.0 or 2.3 Zetec engine installed in many Fords, including the Focus, Escort, Cougar, and Contour / Mondeo. This…
Read MoreHow to MegaSquirt Your 4G63 Powered DSM (Eclipse/Talon/Laser)
Please read the ‘disclaimer’ at the top of the parent page here. This documentation is for using the MS1/Extra firmware version 029v or later, MS2/Extra 3.3.1 or later, and MS3 1.2.4 and later. Tach Input Background: Crank Angle Sensor (CAS) Wheel in the 1G DSM This article was originally based on the 1st gen…
Read More