Search Results for: MSPNP Miata
DB15 Pigtail Harness
SKU: DB15_PIG_6
$23.99
DB15 pigtail harness. Used for optional outputs on the expansion connector on V3.57 boards and for the V1.2 version of the MSPNP Gen 2 (the version with the red main board).
View Details-
Add to cartDB26 Pigtail Harness
SKU: DB26_PIG_6
$28.99
DB26 pigtail connector, as used with the latest MSPNP Gen 2 for its 26 pin expansion connector. Includes 6″ pre crimped wires. Poke in the ones you need, leave out the ones you don’t.
View Details-
Add to cartLDM 1/4″ 316SS Weld-In EGT Bung Cap
SKU: LDM-153310-CAP
$6.86
LowDoller Motorsports 1/4″ Weld-In 316SS EGT Bung Cap Needing a Replacement Weld-in Bung Cap or piecing together your own kit? Then look no further! Features 1/4″ X 316SS Plug for WF250 Direct Weld Fittings, A-Lok (Ferrule), Plug Material: 316 Stainless Steel Size: 1/4″A-Lok, Ferrule Material: Stainless Steel Nut Material: Stainless Steel Silver Plated Includes (1)…
View Details-
Add to cartInnovate MTX-AL analog wideband air/fuel ratio gauge – 38550
SKU: INNVT-3855
$235.99
The Innovate Motorsports MTX-AL combines a stepper driven gauge and Innovate Direct Digital wideband control unit in a single, compact package. It offers the same proven wideband AFR as the MTX-L digital wideband, but with an analog gauge instead of a digital display gauge. This wideband system is compatible with all version of MegaSquirt, MS3Pro,…
View Details-
Add to cartIGN-1 Inductive Coil
SKU: IGN-1
$48.00
Here’s a hot coil at a reasonable price. The IGN-1 shares the same internal core as an IGN-1A, but without the built-in ignitor. This can be used for distributors or coil per plug. Use with BIP373s or an external ignition module. IGN-1 Inductive Coil is vibration resistant, can be mounted at any angle and is…
View Details-
Add to cartIGN-6 Six-Tower Coil Pack
SKU: IGN-6
$79.00
The IGN-6 ‘wasted spark’ style coil pack at a glance could be mistaken for a stock Chrysler ignition coil, perhaps off of a Dodge Intrepid, but it’s not. Though it appears to be molded from the same tooling used to make stock replacement coils for some Mopar products, and would bolt right up to many…
View Details-
Add to cartJimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled
SKU: jimstim-k
$80.99
Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for…
View Details-
Add to cartMAP – GM 3 Bar MAP Sensor 6″ Pigtail
SKU: GM3bar_piggy
$12.49
Compatible with standard keying of GM’s 3-Bar Map Sensor. This plug features 6″ of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black – Sensor Ground Green – Signal to ECU Gray – 5 volt reference voltage from ECU…
View Details-
Add to cartMicroSquirt with 30″ Harness
SKU: MicroSqrt3
$338.99
The versatile MicroSquirt with 30″ Harness: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module- Version 3.0 MicroSquirt with 30″ Harness is an entry-level, fully assembled ECU and universal 30″ pigtail with varied applications targeting power sports, single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark outputs.…
View Details-
Add to cartMicroSquirt ECU Version 3.0
SKU: MicroSquirt
$299.99
Looking for the AMP’d MicroSquirt for it’s tougher injector drivers and flexible configurability? It’s over here! The versatile MicroSquirt ECU Version 3.0 is an ECU plus much more – Original designed as a Standalone Engine Management System for small engines, specifically thinking as a motorcycle ECU or other small engine ECU, the functionality…
View Details-
Add to cart