Showing all 13 results
8′ MegaSquirt Wiring Harness (MS1/MS2/MS3 Ready)
$83.00MegaSquirt Wiring Harness - 8 Feet LongWe've completely redesigned our wire harness to help you get your fuel injection installation right the first time with several new features to help make your installation as easy and reliable as possible:...
Add to cart-
8′ MegaSquirt Wiring Harness for MS3X
$86.00MegaSquirt MS3X Wiring Harness - 8 feet8' of TXL High temp automotive grade wire. Color coded wiring with labeling printed on the wire every 6 inches -- no paper tags here! All wiring is pre-crimped (NOT solder cupped!) to the DB37 Heavy d...
Add to cart -
MegaSquirt-3 PCB3.0 Kit with MapDaddy4 Upgrade
$509.00Important Note: Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures. We appreciate your understanding. MegaSquirt-III Engine Management System w/PCB3.0 - Un...
Add to cart -
MegaSquirt-3 with PCB V3.0 Kit
$445.00Important Note: Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures. We appreciate your understanding. Included is a MegaSquirt-III Engine Management System...
Add to cart -
MegaSquirt 3 EMS System V3.57
$645.00Important Note: Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures. We appreciate your understanding. MegaSquirt 3 Engine Management System w/PCB3.57 - The...
Add to cart -
MegaSquirt 3 ECU with MS3X Expansion
$762.00Important Note: Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures. We appreciate your understanding. The MegaSquirt 3 with MS3X expansion arrives equipped...
Add to cart -
USB Tuning Cable for MegaSquirt-III/ MS3Pro 1st Gen
$7.50Use this cable to plug your MegaSquirt-III, MS3-Pro 1st Gen, or MS3Pro Plug & Play for 2JZ Supra/SC300 directly into your USB port. No adapters required!
Add to cart -
MegaSquirt 3X Wiring Bundle – 8′ long
$51.00MegaSquirt MS3X Wiring Bundle - Length = 8'8' of TXL High temp automotive grade wire. Color coded wiring with labeling printed on the wire every 6 inches -- no paper tags here! Use with MS3X Expansion board or other sequential deviceJust ...
Add to cart -
MegaSquirt-III Daughterboard Kit
$230.00Upgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...
Add to cart -
MegaSquirt-III MS3X Expansion Card & Connector Kit
$110.49Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs t...
Add to cart -
MegaSquirt MS3X Wiring Bundle – 23″
$19.00MegaSquirt MS3X Wiring Bundle - Length = 23"~23" of TXL High temp automotive grade wire. Color coded wiring with labeling printed on the wire every 6 inches -- no paper tags here! Use with MS3X Expansion board or other sequential deviceJ...
Add to cart -
MegaSquirt V3.0 Case
$45.00This is the enclosure as used with the MegaSquirt-III V3.0 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.0 ECU kits. It is required if you are upgradin...
Add to cart -
MegaSquirt V3.57 Case
$45.00This is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart
