Showing all 8 results
-
IGN1A Smart Coil
$71.00The IGN1A Smart Coil by AMP EFI requires no CDI Ignition Module to produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you'd see with a capacitive discharge. They are the same monster coils used in Street Outlaws No Prep Kings conten...
Add to cart -
Pigtail Connector for IGN1A and GM MAF Sensors
$15.994' Flying lead smart coil pigtail for IGN-1A coils. The extra length makes these easy to bundle up into a single ignition control harness without needing splices near the coil. Power and primary ground wires are 18 gauge to better handle these coils' p...
Add to cart -
Crimp Connector for IGN-1A
$5.79Connector for IGN-1A coils, includes crimp on terminals/pins. Like all of our 'ready to crimp' connectors- we include an extra terminal/pin, just in case. Click here to see other ignition system components for your project!
Add to cart -
IGN-1 Inductive Coil
$48.00Here's a hot coil at a reasonable price. The IGN-1 shares the same internal core as an IGN-1A, but without the built-in ignitor. This can be used for distributors or coil per plug. Use with BIP373s or an external ignition module. IGN-1 Inductive Coil ...
Add to cart -
IGN-1CD Capacitive Discharge Coil
$48.00Here's a race coil designed for CDI applications that's small and inexpensive enough to use one per cylinder, if you're so inclined. The IGN-1CD is vibration resistant and can be mounted at any angle. Also works with MSD, Mallory Hyfire, and other capa...
Add to cart -
IGN-4 Four-Tower Coil Pack
$52.99The IGN-4 four tower ignition coil is an affordable option for a hot distributor-less ignition! Similar to our IGN-1A coil, but this unit has four outputs that fire in wasted spark and does not have a built in ignitor. If used with our BIP373 ignition m...
Add to cart -
IGN-6 Six-Tower Coil Pack
$79.00The IGN-6 'wasted spark' style coil pack at a glance could be mistaken for a stock Chrysler ignition coil, perhaps off of a Dodge Intrepid, but it's not. Though it appears to be molded from the same tooling used to make stock replacement coils for some Mo...
Add to cart -
4 Wire Pigtail for Ford MAF/MAP/Coils
$12.994 wire pigtail connector that fits a variety of Ford applications. This connector has been used on many Ford 4 wire MAF sensors from 1984 through the mid 1990s, certain MAP sensors, and many 6 cylinder distributorless ignition coils including EDIS applica...
Add to cart
