Ford 60 Pin EEC4 EECIV PCM Connector

SKU: b_conn-eec4

With the Ford EEC-IV (aka EEC4) 60 Pin PCM Connector, you can build professional adapter harnesses connecting the engine management system of your choice to a wide variety of Ford cars. This one fits cars with a Ford EEC-IV 60 pin ECU. See the DIYBOB main page for an application list. Use it to adapt…

-

GM LS 24x Plug and Play Engine Harness – for MS3Pro Ultimate/Evo

SKU: LS24xEU

For MS3Pro ULTIMATE/ EVO plug and play installation on GM LS engines with a 24x crank trigger. The MS3-Pro 24x LS Plug and Play Harness is the highest quality, best value option for LS Motors in the industry today.  Save your hard earned time and money while experiencing the virtually limitless feature set of MS3-Pro…

GM LS 58x Plug and Play Engine Harness – for MS3Pro Ultimate/Evo

SKU: LS58xEU

For MS3Pro ULTIMATE/ EVO plug and play installation on GM LS engines with a 58x crank trigger. The MS3Pro 58x LSX Series Plug and Play Harness is the highest quality, best value option for LS Motors in the industry today.  Save your hard earned time and money while experiencing the virtually limitless feature set of…

DIYBOB Breakout Adapter – Ford 60 Pin – no connector

SKU: DIYBOB-F60K_NC

The DIYBOB is a revolutionary  breakout board from DIYAutoTune.com that allows you to easily build professional adapter harnesses connecting the engine management system of your choice to a wide variety of cars.  The DIYBOB includes an OEM style connector, circuit board, and an anodized aluminum case for a professional appearance. This one fits cars with a Ford EEC-IV…

-

JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled

SKU: jimstim-k

Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for…

-

MegaSquirt Boost Control Mod Kit

SKU: MK-Boost

Give your Megasquirt the ability to drive a boost control solenoid double up it’s duty as an electronic boost controller. Includes all parts required to build the MSnS-E boost control circuit on your V2.2, V3.0, or V3.57 PCB, including FET, resistors, heat sink compound, mica insulator, and mounting hardware. We’ve used it with MS1/Extra and…

-

DLP-TXRX Internal USB/Serial Adapter

SKU: DLP-TXRX

DLP-TXRX Internal USB/Serial Adapter This adapter is perfect for converting your Megasquirt from the standard DB-9 serial connection to the USB connection common on newer laptops. The DLP-TXRX can be used on the following MegaSquirt products: MS1 V2.2 MS1 V3.0 MS2 V3.0 It is not recommended for the following MegaSquirt products: MicroSquirt MS1 V3.57 MS2…

-

MegaSquirt-III MS3X Expansion Card & Connector Kit

SKU: MS3Xpander

Put this small circuit board in your MegaSquirt-III to unlock its full potential! This board installs in the MS3 case with no soldering; just connect it with the included ribbon cables. Install the MS3X board to add this whole list of inputs and outputs to the MS3 ECU: 8 Sequential fuel injection outputs. Each can…

-

MegaSquirt 3 ECU with MS3X Expansion

SKU: MS3X357-C

Important Note:  Due to supply chain challenges and the lack of ability to have parts anodized at this time, we are transitioning to brushed silver enclosures.  We appreciate your understanding.   The MegaSquirt 3 with MS3X expansion arrives equipped with features surpassing MS2 & MS1 systems, like sequential fuel & spark, 2 step, progressive nitrous, boost…

-

8 1/4″ 36-1 Trigger Wheel

SKU: TW36-1_825

Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4″ in diameter and 1/8″ thick, with a 1/2″ diameter center hole (with plenty of room to enlarge it for larger crank bolts) and six radial locating slots 3/8″ wide. The teeth are 1/4″…

-