Showing all 6 results
-
LS / LSX Engine IGN1A Smart Coil Bracket Kit
$99.00Bolt-on LS Ignition Coil Brackets for IGN1A Smart Coils AMPEFI Billet Aluminum IGN1A Smart Coil brackets for LS Engine Valve covers. These are the same billet brackets used in our MaxSpark Kit allowing you to bolt a set of 8 IGN1A Ignition Coils to fac...
Add to cart -
MegaSquirt V3.57 Case
$46.00This is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart -
Weld-In Fuel Injector Bung for Pico Injectors
$39.00This is a weld-on mounting bung for Pico sized injectors and other tiny injectors with a 33.6 mm O-ring to O-ring distance and 14 mm O-rings, with a top fitting with a 1/8" NPT pipe thread for attaching hard line or AN fittings. It can be welded or brazed...
Add to cart -
Weld-In Fuel Injector Bung for EV14 Injectors
$39.00This is a weld-on mounting bung for EV14 sized injectors with 14 mm O-rings, with a top fitting with a 1/4" NPT pipe thread for attaching hard line or AN fittings. It can be welded or brazed to aluminum, or held on with epoxy if sealed correctly. These co...
Add to cart -
Weld-In Fuel Injector Bung for EV1 and EV6 Injectors
$39.00This is a weld-on mounting bung for EV1 or EV6 sized injectors with 14 mm O-rings, with a top fitting with a 1/4" NPT pipe thread for attaching hard line or AN fittings. It can be welded or brazed to aluminum, or held on with epoxy if sealed correctly. Th...
Add to cart -
MSPNP and DIYPNP IAT Temperature Sensor Kit – Aluminum Bung
$39.99MegaSquirtPNP and DIYPNP IAT Sensor Kit - Aluminum Bung This is a simple kit to make it easier for you when removing your AFM/MAF when using a MegaSquirtPNP or DIYPNP. In many cases, the air temperature sensor is built into the MAF, so removing it will...
Add to cart
