Description
MS3Pro EVO Complete 8′ Flying Lead Harness Only (White & Gray connectors with 8′ pigtails) arrives with color-coded, printed wires per the pinout below.
All applications.
We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...
Add to cartUse this module to convert the sine wave signal from a VR (variable reluctor) signal into an easy to handle square wave hall sensor style signal. The AXM-120 VR conditioner works with camshaft position, crankshaft position, vehicle speed, or similar sen...
Add to cartThe MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cartWire - Twin Core Shielded 22 Gauge Wire - 10' Shielded twin core 22 gauge wire helps cut out interference -- Perfect for Tach/Ignition Signal! This temperature resistant wire has two separate 22 gauge wires in the shield, making it perfect for variable...
Add to cartMegaSquirt Wiring Bundle 8' TXL wire, color coded with labeling printed on the wire every 3 inches -- no paper tags here! IAC and Ignition wires are included for MS-I / MS-2 use (or MS-3 Primary Harness use) Shielded Ignition input wire Grea...
Add to cartHigh Quality 4' Relay Board cable for connecting your MegaSquirt ECU to your Relay Board. Works with MS1, MS2, or MS3, all standard main boards (includes not just the IAC and ignition pins - it also has the spare pins on 3 through 6). It has a shielded...
Add to cart
2 reviews for MS3Pro EVO Wiring Harness – Universal Flying Lead