Description
MS3Pro EVO Complete 8′ Flying Lead Harness Only (White & Gray connectors with 8′ pigtails) arrives with color-coded, printed wires per the pinout below.
All applications.
Metal DB37 Cover with Hardware and Gaskets This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
Add to cartMany older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cartWe've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cartPLUG'N'PLAY BMW E30 Camshaft Sensor Kit Have you noticed that our new E30 MSPNPPro includes both SIX discrete injector outputs and SIX discrete ignition outputs on its rear auxiliary connector? It's all ready to run your engine sequentially, just as soon...
Add to cartIf you have a previously installed Microsquirt harness and want to upgrade to MS3Pro Mini, the upgrade path is simple. However, complete functionality will require a few basic changes to your Microsquirt Harness. Our wiring upgrade kit contains the 7 ...
Add to cartWire - Twin Core Shielded 22 Gauge Wire - 10' Shielded twin core 22 gauge wire helps cut out interference -- Perfect for Tach/Ignition Signal! This temperature resistant wire has two separate 22 gauge wires in the shield, making it perfect for variable...
Add to cart
2 reviews for MS3Pro EVO Wiring Harness – Universal Flying Lead