Description
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Both connectors are industry standard parts - the four pin connector is an M12 circular connector and the 9 pin connector is a D-subminiature. They're available from a variety of sources - Amphenol, Molex, Norcomp, Pheonix Contact, etc.
We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cartFor use with the MS3Pro-Mini ECU. Complete 8′ Flying Lead Harness, arrives with color-coded, printed wires per the pinout below:
Add to cartThis FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cartUse this cable to plug your MegaSquirt-III, MS3-Pro 1st Gen, or MS3Pro Plug & Play for 2JZ Supra/SC300 directly into your USB port. No adapters required!
Add to cartThe MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cartDB9 6' Male/Female Straight thru cable for tuning and testing your MegaSquirt ECU.
Add to cart
Reviews
There are no reviews yet.