Description
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Both connectors are industry standard parts - the four pin connector is an M12 circular connector and the 9 pin connector is a D-subminiature. They're available from a variety of sources - Amphenol, Molex, Norcomp, Pheonix Contact, etc.
Many older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cartIf you have a previously installed MS3Pro harness (1st Gen flying lead or LS Drop On Harness) and want to upgrade to MS3Pro EVO or ULTIMATE ECU, the upgrade path is simple. However, complete functionality will require a few basic changes to your 1st Ge...
Add to cartMaking your own harness? This plug and pin kit features the MS3Pro AMPSEAL white & gray connectors plus 75 pins- more than enough for making your own MS3Pro EVO or 1st Gen harness. MS3Pro ULTIMATE 3-connector AMPSEAL Kit available here
Add to cartWe've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and for spark outputs C and D on a Mic...
Add to cart
Reviews
There are no reviews yet.