Description
16 pin connector with pre-crimped 8″ black wires. Included with MSPNP-MM9093 and MSPNP-MM9495 for extra inputs and outputs. Can also be used with DIYPNPN76-K, DIYBOB-N76K, or to repair a factory wiring harnesses.
This FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cartMegaSquirt Wiring Bundle - 23" Long Perfect for creating your harness adapter (perhaps using a DIYBOB along with this) or for tying into your stock wiring harness! 23" TXL wire, color coded with labeling printed on the wire every 3 inches -- no ...
Add to cartUse this module to convert the sine wave signal from a VR (variable reluctor) signal into an easy to handle square wave hall sensor style signal. The AXM-120 VR conditioner works with camshaft position, crankshaft position, vehicle speed, or similar sen...
Add to cartSealed connector for GM boost control solenoid. This connector is pre-crimped with a 6" pigtail. Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC Solenoid. We continue to offer these connectors for customers that ne...
Add to cartThis pigtail has 10" leads and fits Ford TFI ignition coils. Used on 5.0 Mustangs, injected 351 Windsor motors, the 2.3 Turbo, various incarnations of the 3.8 V6, and many others. Just the thing if you're making a new wiring harness for your 5.0 or other ...
Add to cart12 pin connector with pre-crimped 8" black wires. Included with MSPNP-MM9697 for extra inputs and outputs. Can also be used to repair factory wiring harnesses.
Add to cart
1 review for MSPNP 16 Pin Center Connector