Cart

Quick Links

MegaSquirt Wiring Bundle - 23
MegaSquirt Wiring Bundle - 23
MegaSquirt Wiring Bundle - 23
MegaSquirt Wiring Bundle - 23

MegaSquirt Wiring Bundle – 23″ Long

5 out of 5 based on 2 customer ratings
(2 customer reviews )

$16.00

In stock

Description

MegaSquirt Wiring Bundle – 23″ Long

Perfect for creating your harness adapter (perhaps using a DIYBOB along with this) or for tying into your stock wiring harness!

  • 23″ TXL wire, color coded with labeling printed on the wire every 3 inches — no paper tags here!
  • IAC and Ignition wires are included for MS-I or MS-2 use
  • Shielded Ignition input wire

This will give you all of the color coded automotive grade wiring you’ll need to wire up all of the sensors, ignition components, and the ECU side of the injectors when tying into your factory wiring harness or building a harness adaptor.

Includes these wires:

QuantityWire ColorWire GaugeFunctionLabel
1Tan20Extra I/OMS 3 : SPR1 CAN-H
1Tan / Red20Extra I/OMS 4 : SPR2 CAN-L
1Tan / Green20Extra I/OMS 5 : SPR3
1Tan / Orange20Extra I/OMS 6 : SPR4
1Black/White20Sensor Ground
5Black20Ground
1Orange20Intake Air Temp SensorMS 20 : AIR TEMP
1Yellow20Coolant Temp SensorMS 21 : COOLANT TEMP
1Light Blue20TPS SensorMS 22 : TPS SIG
1Pink20O2 SensorMS 23 : O2 SIG
1Shield 2 White Conductor20Ignition Input Signal (Tach)White: CRANK CKP+ / RPM INPUT Black: CKP-
1Blue/White20IAC1A (MS-II)MS 25 : IAC1A
1Gray205v VREF (TPS, etc)MS 26 : 5V+ VREF
1Blue/Red20IAC1B (MS-II)MS 27 : IAC1B
1Red2012v+ Power to MS (switched)MS 28 : 12V+ SWITCHED
1Green/White20IAC2A (MS-II)MS 29 : IAC2A
1Light Green20Fast IDLE (FIDLE) Control (switched ground)MS 30 : PWM IDLE
1Green/Red20IAC2B (MS-II)MS 31 : IAC2B
2Blue20Injector Bank 1MS 32+33 : INJ BANK1
2Green20Injector Bank 2MS 34+35 : INJ BANK2
1Brown20Ignition Output (MS-II)MS 36 : SPARK A
1Purple20Fuel Pump Relay Control (switched ground)MS 37 : FUEL PUMP RELAY –

Customer reviews

Rated 5 out of 5 stars
2 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

2 reviews for MegaSquirt Wiring Bundle – 23″ Long

  1. 5 out of 5

    Hall Effect Crankshaft Position SensorI bought this item, it's not dirt cheap to me. But, I purchased it. Using it with ms2 extra. Had to do few steps, solder few wires to make it work. Instructions online available step by step. It was easy enough and the felling was rewarding that I did it. The sensor works beautifully, it does the job very nicely, so far I have no complains. Would say much sharper than the pickup sensor for sure. (Project: rotary engine Rx7) thanks diyautotune.

    Was this review helpful to you? 0 of 0 people found this review helpful

  2. 5 out of 5

    Excellent kit
    Fast Shipping
    Great support

    Was this review helpful to you? 0 of 0 people found this review helpful

  3. 5 out of 5

    The better solutionsRobert,from Italy,
    This is the better ,cheapiest solution to drive a Classic europea 4 cylinder engine.
    I install on Classic Opel,20xe,16 e .
    Have about 20 cars runs MS 2, and some of that runs micro,the quickest solutions.
    Thanks DIY,Good device,hope it test cheap!!!

    Was this review helpful to you? 0 of 0 people found this review helpful

  4. 5 out of 5

    Well MadeA very clean installation - fit the v3.0 board perfectly. I won't go back to drilling and filing my own end plates.

    Was this review helpful to you? 0 of 0 people found this review helpful

  5. 5 out of 5

    Huge Upgrade from MS1Very easy to swap out my MS1 processor for an MS2. Much faster and more functionality from 16x16 tables to stepper-style IAC to expanded trigger wheel options. Very happy.

    Was this review helpful to you? 0 of 0 people found this review helpful

Add a review

Are you able to provide wiring with custom colors or labeling?

  • Sorry, we are not set up to custom print wiring at this time.

Questions & Answers