Description
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
$10.50
-
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
Only logged in customers who have purchased this product may write a review.
There are no questions yet, be the first to ask something for this product.
This FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cartUpgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...
Add to cartIncluded is a MegaSquirt-III Engine Management System w/PCB3.0 - Unassembled Kit Part # MS330-K This MS330-K kit includes everything you will need to build your MegaSquirt-3. The genuine B&G partial kit with V3.0 PCB, everything in the standard Bil...
Add to cartMegaSquirt Wiring Bundle 8' TXL wire, color coded with labeling printed on the wire every 3 inches -- no paper tags here! IAC and Ignition wires are included for MS-I / MS-2 use (or MS-3 Primary Harness use) Shielded Ignition input wire Grea...
Add to cartMetalized plastic backshell for the DB15 spare I/O connector, as used on our DIYPNP, VVTuner, and V3.57 boards.
Add to cartThis is the 937GME-ND metalized plastic backshell cover included in our basic Megasquirt kits. It's not the same as the massive AMP metal cover used on our harnesses (that's sold on its own under wiring components), but it is cheap and effective if you're...
Add to cart
2 reviews for Metal DB37 Cover with Hardware & Gaskets