Weld-In Injector Bung for EV1 and EV6 Injectors
Weld-In Injector Bung for EV1 and EV6 InjectorsWeld-In Injector Bung for EV1 and EV6 InjectorsWeld-In Injector Bung for EV1 and EV6 Injectors

Weld-In Injector Bung for EV1 and EV6 Injectors

$38.50

SKU: WeldBungEV1 Category:

Product Description

This is a weld-on mounting bung for EV1 or EV6 sized injectors with 14 mm O-rings, with a top fitting with a 1/4″ NPT pipe thread for attaching hard line or AN fittings. It can be welded or brazed to aluminum, or held on with epoxy if sealed correctly. These could be used to add additional injectors to a charge pipe for staged injection, or to add injectors to a carbureted manifold if you do not want to use a conventional fuel rail design.

Made in the USA from billet aluminum.

Reviews

There are no reviews yet.

Be the first to review “Weld-In Injector Bung for EV1 and EV6 Injectors”

What mounting bungs do I need to order for my injectors?

  • All our mounting bungs are set up for 14 mm injectors.
    • For a 60.65 mm O-ring to O-ring distance, use our EV1 bungs.
    • For a 48.65 mm O-ring to O-ring distance, use our EV14 bungs.
    • For a 33.60 mm O-ring to O-ring distance, use our Pico bungs.