Description
12 pin connector with pre-crimped 8″ black wires. Included with MSPNP-MM9697 for extra inputs and outputs. Can also be used to repair factory wiring harnesses.
12 pin connector with pre-crimped 8″ black wires. Included with MSPNP-MM9697 for extra inputs and outputs. Can also be used to repair factory wiring harnesses.
Square Weatherpack-style connector fits GM IAC valves on TBI and TPI applications, as well as some versions of the LT1. Also used on some Chryslers; this is a pretty common connector style. Perfect if you're converting a carbureted car using a junkyard TB...
Add to cartDB26 pigtail connector, as used with the latest MSPNP Gen 2 for its 26 pin expansion connector. Includes 6" pre crimped wires. Poke in the ones you need, leave out the ones you don't.
Add to cartWeatherpack style connector for GM boost control solenoid. This connector comes with crimp-on pins to keep the number of splices in your wiring harness to a minimum. Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC ...
Add to cartThis FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cartTPS-3 Connector (Uncrimped) GM Style 3-pin TPS Connector complete with: the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cartMegaSquirt Relay Board - Assembled Unit - Part# MSRelay-C Though the Relay/Power Board is not required, it is a convenience and can reduce the chance of miswiring during the installation. The relay board provides a central place for all of the required...
Add to cart
Reviews
There are no reviews yet.