Description
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
$10.50
-
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
Only logged in customers who have purchased this product may write a review.
There are no questions yet, be the first to ask something for this product.
MegaSquirt Relay Board - Assembled Unit - Part# MSRelay-C Though the Relay/Power Board is not required, it is a convenience and can reduce the chance of miswiring during the installation. The relay board provides a central place for all of the required...
Add to cartDB37 female solder cup connector, as included in our Megasquirt and relay board kits. Use this if you're making a new harness and prefer a soldered connection. This is the connector only; the backshell is sold separately.
Add to cartThis is the 937GME-ND metalized plastic backshell cover included in our basic Megasquirt kits. It's not the same as the massive AMP metal cover used on our harnesses (that's sold on its own under wiring components), but it is cheap and effective if you're...
Add to cartIncluded is a MegaSquirt-III Engine Management System w/PCB3.0 - Unassembled Kit Part # MS330-K This MS330-K kit includes everything you will need to build your MegaSquirt-3. The genuine B&G partial kit with V3.0 PCB, everything in the standard Bil...
Add to cartThe Zeal Engineering Daughterboard was designed and developed by Ken Culver, one of the authors of the MS2/Extra and MS3 firmware. We're proud to now offer this daughter card in kit form. It was originally developed for the FC RX-7, but we have found it...
Add to cartDB9 6' Male/Female Straight thru cable for tuning and testing your MegaSquirt ECU.
Add to cart
2 reviews for Metal DB37 Cover with Hardware & Gaskets