$3.00
-
DB37 female solder cup connector, as included in our Megasquirt and relay board kits. Use this if you’re making a new harness and prefer a soldered connection. This is the connector only; the backshell is sold separately.
There are no questions yet, be the first to ask something for this product.
Use this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...
Add to cart
This is the 937GME-ND metalized plastic backshell cover included in our basic Megasquirt kits. It's not the same as the massive AMP metal cover used on our harnesses (that's sold on its own under wiring components), but it is cheap and effective if you're...
Add to cart
Metal DB37 Cover with Hardware and Gaskets This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
Add to cart
DIYAutoTune Part# JimStim-C JimStim is essentially an engine simulator, a microcontroller which allows the generates up to 30 different toothed wheel signals, in addition to the standard distributor signal. Test your RPM input on the Stim, or tell the ...
Add to cart
Upgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...
Add to cart
The Zeal Engineering Daughterboard was designed and developed by Ken Culver, one of the authors of the MS2/Extra and MS3 firmware. We're proud to now offer this daughter card in kit form. It was originally developed for the FC RX-7, but we have found it...
Add to cart
Reviews
There are no reviews yet.