Quick Links

LDM-4-Cylinder-.25 EGT KIT

LDM 4 Cylinder 1/4″ Open Tip Probe EGT KIT




LowDoller Motorsports

4 Cylinder 1/4″ Open Tip EGT KIT RATED AT 525°F/274°C

Wanting to add EGT sensors to all (4) cylinders look no further!


  • K-Type 1/4″ Open Tip Inconel Probes
  • 316SS Compression Assemblies and Caps


  • (4) K-TYPE, 0.250’’ OD x 4.5’’ Open Tip Inconel Probe w/ 90° Bend 1.5’’ from transition, 0.080’’ exposed junction, Stainless Steel Transition w/ LC High Temp Ceramic Potting (2800°F), 72’’/20GA Stranded Wire Lead w/ Fluoropolymer FEP (TEFLON) Insulation, Stainless Steel Overbraid on Wire (“R”), Open Wire End, NO CONNECTOR OPTION
  • (4) 1/4’’ to 0.250’’ ID Bore Thru Direct Weld Fitting, 316SS Single Ferrule Compression Fitting Assembly
  • (4) 1/4″ X 316SS Plug for Direct Weld Fittings, A-Lok (Ferrule), Plug Material: 316 Stainless Steel Size: 1/4″A-Lok, Ferrule Material: Stainless Steel Nut Material: Stainless Steel Silver Plated
  • (4) K-TYPE 500 SERIES MINI PLUG, RATED AT 525°F/274°C


Customer reviews


There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Can I use this EGT probe with my ECU?

  • You must use an EGT amplifier with this probe such as the CAN-EGT or Innovate TC-4

How exactly do I install these probes?

  • They require a compression fitting dilled and welded in place, which are included.

Can I cut the leads if they are too long?

  • We do not recommend this as it is difficult to cut the leads cleanly. It is better to just coil them out of the way.

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Only registered users are eligible to enter questions