Description
IAC Valve Connector (Uncrimped)
Complete with the connector, four pins, plus an extra pin (just in case)
Customers' review
Be the first to review “IAC Valve Connector with Crimp Terminals”
You must be logged in to post a comment.
What sort of valves does this fit?
- This fits many GM and Chrysler idle air control valves, including LSx engines with cable operated throttle bodies and ’90s era Jeep 4.0 idle valves. Check your valve to make sure its connector style matches before ordering.
Questions & Answers
Related Products
54 mm Optical Trigger Wheel for Nissan L28ET or VG30E
$28.00Convert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt in optical shutter wheel! This one replaces the ring of four slits with a 24-1-1 wheel that behaves like a 12-1 crank trigger. Then we added an outside slot to provide a cam ...
Add to cart-
TPS Pigtail (GM inline style)
$12.99Three pin, GM WeatherPack style, inline throttle position sensor. Fits the TPS on many GM TPI installations, Holley Stealth Ram and Pro-Jection, and Rochester feedback carburetors. Note the keying, shown in the product gallery zoom.
Add to cart -
Hall Effect Crankshaft Position Sensor
$37.50Hall effect crankshaft or camshaft position sensor. We've tested this with our 6.75" and 8.25" trigger wheels. We were able to get a rock solid reading at over 19,200 RPM, which is as fast as our test rig could spin the trigger wheel. Runs off 5 to 24 vol...
Add to cart -
Stainless Steel EGT 1/8″ NPT Compression Fitting
$14.00Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8" NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
Add to cart -
3/8″ NPT Stainless Steel Weld-On Bung for IAT or CLT Sensor
$9.493/8" NPT Stainless Steel Weld-On Bung for IAT or CLT SensorOur 3/8" pipe fitting for temperature sensors is now available in stainless steel. This one can be welded to either stainless or mild steel. Comes with galvanized steel plug as well.
Add to cart -
EGT Port Cap Kit – Package of 3
$11.49Removing your EGT probes? Seal the hole with these cap kits.Note: These will not fit our thread in fittings (EGT_0004). If using the thread in fittings, you will need to unscrew the fitting and replace with a 1/8" NPT pipe plug instead. They will fit ...
Add to cart
Reviews
There are no reviews yet.