Description
Included is an 8′ long harness for installing the MicroSquirt on larger vehicles instead of motorcycles and ATVs. Serial cable included.
Customers' review
Be the first to review “MicroSquirt Wiring Harness – 8ft”
You must be logged in to post a comment.
Where is this harness manufactured?
- It is assembled in the USA.
What sort of serial cable does it use?
- It uses the same DB9 to 2.5 mm barrel connector used with the Innovate LC-1 and VVTuner.
What grade of wiring is used?
- This harness uses 20 gauge TXL high temperature automotive wiring. All wires are color coded and printed with their functions.
Where can I get a wiring diagram for it?
- See the documentation at MSExtra.com.
Can I remove any wires I'm not using?
- Yes. You can unlock the connector with a screwdriver, at which point unused wires simply pull out the back of the connector. If you need to maintain waterproofing, you will need to insert a cavity plug into the connector (not included).
Questions & Answers
There are no questions yet, be the first to ask something for this product.
Related Products
Weather Pack Pin Removal Tool
$4.95This tool makes de-pinning Weather Pack connectors a simple snap or poke.Just pop the seal retainer off, poke the tool in from the terminal side, slipping the tool over the terminal all the way in to release the latch, and pull the wire out from the...
Add to cart
GM Boost Control Solenoid Connector with Crimp-On Pins
$10.25Weatherpack style connector for GM boost control solenoid. This connector comes with crimp-on pins to keep the number of splices in your wiring harness to a minimum.Note: This connector is not needed for our newer style (12/2008 and newer) non-GM EBC ...
Add to cart
MicroSquirt Module V2.2
$270.00MicroSquirt Module is a credit card sized engine management board! This board packs all the features of the MicroSquirt except high current ignition drivers into a 3.5" x 2.4" PCB, with all components installed. This tiny ECU opens up unprecedented possib...
Add to cart
Innovate LC-1 Serial Cable – 3746
$14.00Innovate serial cable for the LC-1. Also can serve as a replacement serial cable for the VVTuner, MSPNP2-EEC4A8 or EEC4B8, and Microsquirt.
Add to cart
Wire – 2 Core Shielded 22 Gauge – 10′
$14.00Wire - Twin Core Shielded 22 Gauge - 10'Shielded twin core 22 gauge wire helps cut out interference -- Perfect for Tach/Ignition Signal! This temperature resistant wire has two separate 22 gauge wires in the shield, making it perfect for variable relu...
Add to cart
MicroSquirt 30″ Pigtail Harness
$79.0030" Universal harness and serial cable for MicroSquirt (sold separately). This package includes all the wiring normally included with the Microsquirt on its own for customers who happen to need a spare or replacement harness.
Add to cart
Reviews
There are no reviews yet.