Description
Mild Steel oxygen sensor bung and plug set, weld on and go. Fits wide band oxygen sensors and most narrow band oxygen sensors.
Standard M18 x 1.5 thread.
Customers' review
Be the first to review “Mild Steel M18X1.5 Thread Bung and Plug Kit – 3735”
You must be logged in to post a comment.
What O2 sensors does this work with?
- It has an M18 x 1.5 thread that is pretty much an industry standard. This bung and plug will work with all Innovate Motorsports wideband systems that we sell. It will accept Bosch LSU 4.2 and 4.9 widebands, NTK widebands, and most narrow band sensors as well. A few motorcycles and ATVs use a smaller thread.
Can I weld it to stainless steel?
- Welding mild steel to stainless is a bit harder than welding it to mild steel, but a competent welder should have no problem.
Questions & Answers
There are no questions yet, be the first to ask something for this product.
Related Products
MPX4250 2.5 Bar MAP Sensor
$28.00MPX4250AP MAP Sensor Standard 2.5 bar Map Sensor used in MegaSquirt PCB 2.2/3.0/3.57 ECUs.Good for 21-22psi of boost, or for NA usage in non-boosted applications.
Add to cart
3/8″ NPT Aluminum Weld-On Bung for IAT or CLT Sensor
$9.003/8" NPT Aluminum Weld-On Bung for IAT or CLT SensorBung is 6061-T6 aluminum alloy; the included plug is galvanized steel.
Add to cart
Innovate Motorsports DL32 Datalogger and Sensor Controller – 378
$499.00DL32 Datalogger and Sensor ControllerThe DL-32 is a complete vehicle-mounted data-logging system for advanced engine tuning. The system is anchored by Innovate's award-winning digital wideband air/fuel ratio technology, but also includes flexible sens...
Add to cart
Stainless Steel EGT Weld-In Compression Fitting
$14.85Got a stainless steel exhaust? Here's what you need to install an EGT probe in it. Weld this compression fitting into your headers or exhaust pipe. It holds a EGT probe securely in place. Compression type fitting provides a leak-free seal that holds up at...
Add to cart
Innovate Motorsports HBX-1 Heat Sink Bung Extender – 3729
$89.00Innovate Motorsports HBX-1 Heatsink Bung Extender - #3729The Bosch LSU4.2 wide-band O2 sensor (shipped as part of the LC-1 and LM-1 kits) is rated to operate at an exhaust gas temperature of < 1300 degrees (F), and a sensor housing temperature of &...
Add to cart
Innovate Accessory Replacement Kit – 3749
$15.00$12.75The accessory replacement kit (Innovate P/N 3749) includes the parts to make it easier to move your DL-32 data logger or LMA-3 AuxBox from one installation to another. Includes a removable terminal block, plus four screws, four vibration isolators, four w...
Add to cart
Reviews
There are no reviews yet.