Description
Metri-Pack crimp connector for wiring up IGN-1 or IGN-1CD coils.
Like all of our ‘ready to crimp’ connectors- we include an extra terminal/pin, just in case you goof one up.
$7.29
-
Metri-Pack crimp connector for wiring up IGN-1 or IGN-1CD coils.
Like all of our ‘ready to crimp’ connectors- we include an extra terminal/pin, just in case you goof one up.
There are no questions yet, be the first to ask something for this product.
150 amp circuit breaker. This is a sealed, marine grade unit with a reset lever. 3/8" lugs for ring terminal attachments. Manual trip/reset lets you activate the breaker with the blue push button. Maximum voltage 48 volts DC. Made in the USA.
Add to cartUSB A to Mini B cable. Use this with the following products: MS3Pro EVO MS3Pro Ultimate CAN-EGT MS1 or MS2 V2.2 or V3.0 modified with DLP-TXRX mod kit We include this cable with MS3Pro EVO & Ultimate. Does not fit MS3 V3.0 or V3.57.
Add to cart4' Flying lead smart coil pigtail for IGN-1A coils. The extra length makes these easy to bundle up into a single ignition control harness without needing splices near the coil. Power and primary ground wires are 18 gauge to better handle these coils' p...
Add to cartThis pigtail connector fits some GM OBD-I external DIS modules, including most 1995 and earlier Saturns. Check your module for the "missing pin" position to make sure this is the right one for your module. Replaces GM part number 12101880
Add to cartHere's a race coil designed for CDI applications that's small and inexpensive enough to use one per cylinder, if you're so inclined. The IGN-1CD is vibration resistant and can be mounted at any angle. Also works with MSD, Mallory Hyfire, and other capa...
Add to cart
Reviews
There are no reviews yet.