Description
Need to remove a pin from one of our assembled MegaSquirt harnesses? These little tools are what you need to release the pins from a D-Subminiature connector so you can pull the wire out.
$6.00
-
Need to remove a pin from one of our assembled MegaSquirt harnesses? These little tools are what you need to release the pins from a D-Subminiature connector so you can pull the wire out.
Only logged in customers who have purchased this product may write a review.
What sort of D-Sub connectors does this work with?
What are the two different ends for?
How do I use this to remove pins from my harness?
There are no questions yet, be the first to ask something for this product.
This tool makes de-pinning Weather Pack connectors a simple snap or poke. Just pop the seal retainer off, poke the tool in from the terminal side, slipping the tool over the terminal all the way in to release the latch, and pull the wire out from the...
Add to cartLead Bending Tool This inexpensive lead bending tool will come in very handy when building up your MegaSquirt kit or any electronics kit. It helps you to quickly bend the leads of 1/4 and 1/2 watt resistors, diodes, capacitors, inductors, etc to the ex...
Add to cartAnti-Static ESD Protection Wrist Strap Protect your electronics from Electrostatic Discharge (ESD) during assembly or modification. Attach this wrist strap by connecting the clip to a good ground point and you'll safely discharge all static electricity...
Add to cartNeed to crimp your Weather Pack connectors to heavier gauge wire? This one will crimp 10 and 12 gauge. Like our other tool, this is a quality, American made crimper. It doesn't have the holding block like on the smaller tool however, and it needs two sepa...
Add to cart
1 review for D-Sub Connector Pin Removal Tool