Cart

Quick Links

Sensors

System Sensors & Equipment including wideband o2 systems, fluid/air pressure sensors, fluid/air temperature sensors, EGT measurement and more for use with our MegaSquirt engine managements systems.

EPA, CARB & Emissions Disclaimer- All ECU's are for race purposes only. It's your responsibility to remain in compliance with all federal, state, provincial, or other laws that apply to you.

Showing 49–64 of 77 results

  • GM Closed Element CLT/Oil Temperature Sensor with Pigtail

    5 out of 5
    $22.99

    GM Closed Element Coolant / Oil Temperature Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) or Oil Temperature Sensor on all vehicles.  This sensor can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicl...

    Add to cart
  • 3/8″ NPT Aluminum Weld-On Bung for IAT or CLT Sensor

    $12.99

    3/8" NPT Aluminum Weld-On Bung for IAT or CLT Sensor Bung is 6061-T6 aluminum alloy, no plug is included.

    Add to cart
  • 3/8″ NPT Stainless Steel Weld-On Bung for IAT or CLT Sensor

    5 out of 5
    $12.99

    3/8" NPT Stainless Steel Weld-On Bung for IAT or CLT Sensor Our 3/8" pipe fitting for temperature sensors is now available in stainless steel. This one can be welded to either stainless or mild steel. Comes with galvanized steel plug as well.

    Add to cart
  • 3 Position GM Type MAF & LS1 Crank/Cam Sensor Pigtail

    $19.00

    GM Mass Air Flow Sensor Pigtail - 3 position This 3 position pigtail fits certain 3 wire GM Mass Air Flow MAF sensors, as well as LS1 camshaft position sensors and crankshaft position sensors.  See image to verify this is the GM MAF Connector you're loo...

    Add to cart
  • MAP – GM 3 Bar MAP Sensor 6″ Pigtail

    $12.49

    Compatible with standard keying of GM's 3-Bar Map Sensor.  This plug features 6" of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black - Sensor Ground Green - Signal...

    Add to cart
  • GM Open Element IAT Sensor with Connector

    5 out of 5
    $23.00

    These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins.  One extra crimp pin is included as a spare.  The threads are 3/8" NPT pipe thread - note that isn't an actual 3/8" o...

    Add to cart
  • GM Closed Element CLT/Oil Sensor with Connector

    5 out of 5
    $19.99

    These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins.  Suitable for use as a coolant temperature or oil temperature sensor, and is occasionally used as an air temperature s...

    Add to cart
  • GM 3Bar MAP Sensor Uncrimped Connector

    $9.00

    Plug and pin set for a GM 3-bar MAP sensor.  We include an extra pin and wire seal just in case you need it as well. Also available as a pigtail, if preferred.  

    Add to cart
  • 8 1/4″ 36-1 Trigger Wheel

    5 out of 5
    $33.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and six radia...

    Add to cart
  • 8 1/4″ 36-1 Trigger Wheel – No Slots

    5 out of 5
    $33.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 8 1/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...

    Add to cart
  • 6 3/4″ 36-1 Trigger Wheel

    4.5 out of 5
    $32.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight rad...

    Add to cart
  • 6 3/4″ 36-1 Trigger Wheel – No Slots

    4.8333333333333 out of 5
    $32.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...

    Add to cart
  • 4″ 36-1 Trigger Wheel

    5 out of 5
    $26.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight radial locating s...

    Add to cart
  • 4″ 36-1 Trigger Wheel – No Slots

    $26.00

    Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This one is 4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth are 1/4" high, s...

    Add to cart
  • Crankshaft / Camshaft Position Sensor – Hall Effect Threaded Body

    4.4285714285714 out of 5
    $102.99

    Crankshaft Position Sensor - Hall Effect Threaded Body Hall Effect Crankshaft position sensor with a threaded body, this sensor makes life easy-- it just works.  Also makes a great camshaft position sensor, or for that matter, an 'anything that spins po...

    Add to cart
  • Crankshaft / Camshaft Position Sensor – Hall Effect tab mount

    4.9166666666667 out of 5
    $37.50

    Crank Position Sensor - Hall Effect tab mount Hall effect crank position sensor (or camshaft position sensor, or wheelspeed, or driveshaft speed, anything that spins!). We've tested this with our 6.75" and 8.25" trigger wheels. We were able to get a rock...

    Add to cart