Race Technology Dash2Pro CAN Transmit Option

Description

With this option the unit can transmit any of the internal data channels on the CAN bus at a rate determined by the configuration.  A .DBC file is provided with the default channel data and decoding information to make use with third party CAN reception systems much easier.  Data for transmission on the CAN bus could be from the internal sensors (GPS, accelerometer, gyro, analogue channels, etc.) or from the serial input from an ECU interface or other unit attached to the serial port.   The transmission rate for each channel can be individually configured at rates of up to 100Hz. Transmission can use 29bit or 11bit addressing at a number of different baud rates.