Cart

Quick Links

QuadSpark Four Channel Ignition Module

5 out of 5 based on 1 customer rating
(1 customer review)

$94.00

-

Description

Waterproof and capable of handling plenty of current, each channel of the Quadspark Ignition Module needs a 5 volt logic level signal.

Perfect for running IGN-1, IGN-1FD, IGN-4, or IGN-6 coils. Or use them with OEM distributor-less ignitions that don’t have the ignition module built into the coil, such as the coils found on many Ford, BMW, or Chrysler coil on plug or wasted spark applications.

Heat sink, PCB, and final assembly all made in the USA – some of the electrical parts like the German BIP373s are imported.

Dimensions:  4.5″ wide, 2.75″ deep, and 1.5″ tall.

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for QuadSpark Four Channel Ignition Module

Only logged in customers who have purchased this product may write a review.

Where is this product manufactured?

  • Quadspark is proudly manufactured in Suwanee, Georgia, USA.

How does this wire up to my ECU?

Is it possible to use this ignition module with a brand [enter your brand here] ECU?

  • Quadspark should be compatible with any ECU that outputs a standard 5V DC logic ignition signal, but we do not have specific directions for using this ignition module with non MegaSquirt ECU products.

What type of power transistors are used in the Quadspark?

  • Quadspark uses genuine Bosch BIP373 power transistors.  We have found these to be very capable ignition drivers and exceedingly reliable.

C’mon, do I REALLY need to hook up all the ground wires?

  • YES!  Superior grounding is the foundation upon which a strong ignition system is built.  If wired and used correctly, the Quadspark module is a powerful and reliable inductive ignition module.

Questions & Answers

    Will this work without modification on the Renault wasted spark ignition coils (e.g. Magneti Marelli BAE801)? I have the MS3 w/MS3X pre-assembled ECU from you guys. Have been told the Bosch BIP373 works fine for these.
  1. 0 votes
    Q Will this work without modification on the Renault wasted spark ignition coils (e.g. Magneti Mare...... Read more
    Asked by Gman
    Answered by the admin

    We can't answer this for every OEM coil, but fortunately Magneti Marelli publishes a data sheet for this particular coil. And the short answer is yes.

    For those looking to learn how to read a coil data sheet, here's how to determine this. According to the data sheet, this coil needs an external ignition module that switches current (which the QuadSpark does), can use a maximum current of 6 amps (which is within the QuadSpark's maximum current), and can handle a dwell of 3.5 ms or less (which is what you'll enter in TunerStudio).

  2. Can I use this to give spark to my Honda j35 v6?? I’m not getting spark to the car, can I hook this up to the CKSP and run it???
  3. 0 votes
    Q Can I use this to give spark to my Honda j35 v6?? I’m not getting spark to the car, can I hook th...... Read more
    Asked by Benny
    Answered by the admin

    This box is intended to go between an ECU that provides a 5 volt logic level spark output and a coil that does not have an internal ignition module. The QuadSpark does not interface with a crank position sensor directly, and will not work with coils with a built in ignition module. Many Honda J series coils will have the ignition module built in.

  4. will this work with MSD #8224 coils and a rewired back plate with your PNP BMW m20 megasquirt? also if this is used with ing-6 coils what do we do with the spark D in&out wire? Thank you
  5. 0 votes
    Q will this work with MSD #8224 coils and a rewired back plate with your PNP BMW m20 megasquirt? al...... Read more
    Asked by thomas m bos
    Answered by the admin

    Yes, it will work with either one, although you'd need to gut a factory GM ignition module if you want to use the MSD coils. The Spark D input and output wires are simply left disconnected.

  6. I am interested in this ignition module for a wasted spark set up on a mustang 363 with a 80mm turbo running up to 16 lbs. of boost. I am running EDIS coils from Accell currently. Will this igniter have enough power to run the coils and spark plugs without the need for a MSD (DIS-4) or other spark boosting devise? Thanks
  7. 0 votes
    Q I am interested in this ignition module for a wasted spark set up on a mustang 363 with a 80mm tu...... Read more
    Asked by Scott Covington
    Answered by the admin

    I've seen it used with those boost levels before. If the Accel coil pack is not adequate, you can use our IGN-4 coil packs as an upgrade.

  8. So this has outputs to run 4 separate ignition coils in a COP arrangement?
  9. 0 votes
    Q So this has outputs to run 4 separate ignition coils in a COP arrangement?
    Asked by Craig
    Answered by the admin

    Correct. It will need four logic level inputs.

  10. What are the dimensions?
  11. 0 votes
    Q What are the dimensions?
    Asked by HAROLD WHITED
    Answered by the admin

    4 1/2" wide, 2 3/4" deep, and 1 1/2" tall.

Only registered users are eligible to enter questions