Description
MPX4250AP MAP Sensor Standard 2.5 bar Map Sensor used in MegaSquirt PCB 2.2/3.0/3.57 ECUs.
Good for 21-22psi of boost, or for NA usage in non-boosted applications.
Shop » MegaSquirt Kits & Components » MegaSquirt Service Parts » Integrated Circuits » MPX4250 2.5 Bar MAP Sensor
MPX4250AP MAP Sensor Standard 2.5 bar Map Sensor used in MegaSquirt PCB 2.2/3.0/3.57 ECUs.
Good for 21-22psi of boost, or for NA usage in non-boosted applications.
You must be logged in to post a comment.
Only logged in customers who have purchased this product may write a review.
Can this be used as an external MAP sensor?
What MegaSquirt units can I use this sensor with?
It is set up to use 1/8" hose.
Please see the official data sheet for full specifications, including what pins are used for what purpose.
LowDoller Motorsports 3 bar MAP Sensor. (-1 bar to +2bar) Features 1/8" NPT Thread Heavy Duty Stainless Steel body Accuracy 0.5% of full scale. Includes 3 bar (-14.5 PSI to +29 PSI) Absolute Pressure Sensor...
Add to cartBA05CC0T 5 volt regulator, used as a higher capacity replacement for LM2937ET-5.0-ND. U5 in both the V2.2 and V3.0 kits.
Add to cartCompatible with standard keying of GM's 3-Bar Map Sensor. This plug features 6" of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black - Sensor Ground Green - Signal...
Add to cartGM 3 Bar MAP Sensor aka Manifold Absolute Pressure Sensor. This sensor is good for up to 29psi of turbo/supercharger boost and is fully compatible with the MS3Pro ECU and all flavors of the MegaSquirt EMS / MicroSquirt EMS. Replaces GM Part Numbers 12...
Add to cartLowDoller Motorsports 4 bar MAP Sensor. (-1 bar to +3bar) Features 1/8" NPT Thread Heavy Duty Stainless Steel body Accuracy 0.5% of full scale. Includes 4 bar (-14.7 PSI to +43.5 PSI) Absolute Pressure Sensor ...
Add to cartThe classic 555 timer integrated circuit, in an 8 pin DIP package. This little chip has plenty of uses. In the MegaSquirt lineup, the older Stim boards used it to generate an RPM signal, and the DIYPNP uses it in its knock circuit. See the MS1/Extra manua...
Add to cartFree shipping to all retail customers on all orders of $799 or more
Applies to ground shipping to US48 Dismiss
2 reviews for MPX4250 2.5 Bar MAP Sensor