Description
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
$10.50
-
Metal DB37 Cover with Hardware and Gaskets
This Metal DB37 cover is perfect for building up your own Megasquirt wiring harness or relay cable connector.
Only logged in customers who have purchased this product may write a review.
There are no questions yet, be the first to ask something for this product.
Metalized plastic backshell for the DB15 spare I/O connector, as used on our DIYPNP, VVTuner, and V3.57 boards.
Add to cartMegaSquirt Wiring Bundle 8' TXL wire, color coded with labeling printed on the wire every 3 inches -- no paper tags here! IAC and Ignition wires are included for MS-I / MS-2 use (or MS-3 Primary Harness use) Shielded Ignition input wire Grea...
Add to cartNote: Now using a brushed silver finish MS3 enclosure, which will help facilitate potential future upgrades from MS2 to MS3 without extra cost! MegaSquirt-II Engine Management System with 3.0 main board - Unassembled Kit; Part # MS230-K The MS23...
Add to cartUse this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...
Add to cartUpgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...
Add to cartThis is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart
2 reviews for Metal DB37 Cover with Hardware & Gaskets