Description
Heat Sink Machined for MegaSquirt PCB version 3.0
Part# MSx30-HS
$10.00
-
Heat Sink Machined for MegaSquirt PCB version 3.0
Part# MSx30-HS
Where is this heat sink made?
There are no questions yet, be the first to ask something for this product.
High Quality 4' Relay Board cable for connecting your MegaSquirt ECU to your Relay Board. Works with MS1, MS2, or MS3, all standard main boards (includes not just the IAC and ignition pins - it also has the spare pins on 3 through 6). It has a shielded...
Add to cartDB15 pigtail harness. Used for optional outputs on the expansion connector on V3.57 boards and for the V1.2 version of the MSPNP Gen 2 (the version with the red main board).
Add to cartUpgrading your MS1 or MS2 to the latest MS3 has never been easier with this processor replacement! We've packaged the MS3 daughter board with 2 of the 40 pin sockets, so it will match up with our cases (required for upgrade) which have cutouts for the SD ...
Add to cartThis FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cartThe regular JimStim can test the main board on your MS3. But what if you'd like to see the inputs and outputs on the MS3X expansion card in action, too? Now it's easy - just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 vo...
Add to cartThis is the enclosure as used with the MegaSquirt-III V3.57 ECU. It includes cutouts for the SD card, USB port, and MS3X expansion card. This is the case included with all of our current MS1, MS2, and MS3 V3.57 assembled ECUs. It is required if you ...
Add to cart
Reviews
There are no reviews yet.