Cart

Quick Links

MegaSquirt-I Programmable EFI System PCB3.0 - Kit
MegaSquirt-I Programmable EFI System PCB3.0 - Kit
MegaSquirt-I Programmable EFI System PCB3.0 - Kit
MegaSquirt-I Programmable EFI System PCB3.0 - Kit
MegaSquirt-I Programmable EFI System PCB3.0 - Kit

MegaSquirt-I Programmable EFI System PCB3.0 – Kit

5 out of 5 based on 4 customer ratings
(4 customer reviews )
MegaSquirt-I Programmable EFI System PCB3.0 - Kit

$254.00

In stock

Add the optional Q16 high current coil driver

Bosch BIP373 Coil Driver Mod Kit – optional

In stock

SKU: MS130-K Category: Brand:

Description

Part # MS130-K; MegaSquirt-I Programmable EFI System with V3.0 main board – Unassembled Kit with Black Case

Important Note: The BIP373 coil driver is sold separately and is only required for direct coil control. If you are using coils with internal or external ignition modules, you do not need any BIP373 drivers. 

The MS130-K kit includes everything you will need to build your MegaSquirt ECU. The genuine B&G partial kit with PCB3.0, the Bill Of Materials, the case, pre-machined endplates and heatsink bar, even the tube of heatsink compound and a bit of jumper wire is included.  All you add is tools, solder, and time!  Only other thing you might need is a tuning cable if you don’t have one already.  We have those available as well for a few bucks.

MS130-K Kit Bill Of Materials (BOM) Includes:

  • All ‘Basic Components’
  • PWM Flyback Damping Circuit components
  • Hall Sensor/Coil(-) and VR Sensor Ignition Trigger Components
  • Current Limiting Circuit Components

That’s right, every single option to put together a standard V3.0 build. We also stock mod kits to expand its functionality.

Legend for Kit Labels

 

The MegaSquirt EFI System is truly the dream Electronic Fuel Injection computer for the DIYer. MegaSquirt has been installed on thousands of engines from restored classics to daily drivers to full on race-cars. Turbo, supercharged, or NA the MegaSquirt can handle your fueling needs. More information about MegaSquirt can be found here.

Features / Benefits of the MegaSquirt-I EFI System

  • Onboard MAP sensor for N/A or boosted engines up to 21psi!
  • Speed density or Alpha-N.
  • Use any injector – High or Low impedance.
  • Compatible with output from narrowband sensors and wideband O2 systems.
  • Log data on your laptop for later analysis.
  • Tuning software is free for download and regularly updated with new features.
  • Open Source design – all code and hardware information is available online.
  • Includes proper female DB37 connector and shell for your wiring harness.
  • Professionally Machined Brushed Aluminum Endplates. Excellent Fit and Finish!
  • Brushed Aluminum Case with flanged ends for easy mounting.

Updated Features specific to the latest PCB Version 3.0

  • All automotive temperature grade components for increased reliability.
  • Higher quality 4 layer PCB for increased resistance to noise/crosstalk. All PCB’s electrically tested at the factory for enhanced quality control.
  • Added current limiting circuitry to provide increased fault tolerance— it other words, it’s much harder to blow this thing up if you make a mistake!
  • Uprated Flyback circuitry is now built in- bring on the low-z injectors!
  • Onboard Heatsink bar
  • Large Prototype area onboard- for adding custom circuitry to your ECU
  • Supports use of original MS tach input, ignition coil triggering, VR, Hall and Optical sensor triggering.
  • Direct Ignition coil driver is now on-board

MS1/Extra firmware allows this board to be extended well beyond its original plans. Here are some of the things you can do with the latest code and suitable hardware mods:

  • Ignition Control, distributor-based and distributorless (DIS) systems
  • 12×12 Volumetric Efficiency (VE) and Ignition Tables
  • Closed loop boost control
  • Rev limiters
  • Shift Light control
  • Water Injection control
  • Knock Sensor Input

Mod kits to add new hardware features are sold separately.

Read about how to use MS1/Extra at MSExtra.com!

Fully upgradeable to MegaSquirt II or III Fuel and Ignition Controller

This unit can be upgraded to MegaSquirt 2 or 3 and you’ll have the following new/improved features:

  • Ignition control (full spark timing advance control, dwell control, etc) for one coil/distributor, distributorless, and EDIS systems,
  • Fuel/Spark tuning tables at 12×12 resolution or even up to 16×16 fuel table resolution running the latest MS2-Extra firmware
  • On-board stepper motor driver for IAC stepper control (this will require a few jumper wires to be added on the MegaSquirt PCB)
  • More processor speed
  • 100X greater pulse width resolution
  • Easier configuration and tuning setup
  • MS3 adds significant extra I/O capabilities including 8cyl ignition and sequential fuel control

Schematics and source code are publically available for tinkerers!

You can customize both the hardware and the firmware to meet your needs. Schematics are published to help with troubleshooting and modifications, and the firmware is available in assembly language if you wish to write your own code!

As with all DIYAutoTune.com un-assembled kits, the quality is second to none. Everything is meticulously organized and labeled to help make your ECU assembly go as smoothly as possible. For example, each of the above bags contains a certain type of part, one with all of the resistors, one with diodes, one with capacitors, etc. Inside each of these bags the parts are further broken down and labeled in theri own individual baggies as pictured below. We even go so far as to put the components in numeric order to make finding them easier. We’ve really tried to think of everything….

 

Includes everything you need to build the ECU shown below, only the case will be black anodzied.

Customer reviews

Rated 5 out of 5 stars
4 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

4 reviews for MegaSquirt-I Programmable EFI System PCB3.0 – Kit

Only logged in customers who have purchased this product may write a review.

What inputs and outputs are provided with this kit?

  • It includes the circuitry needed to connect to the following sensors and outputs:
    • Coolant temperature
    • Intake air temperature
    • 2.5 bar MAP sensor (onboard)
    • Oxygen sensor – narrow band or wideband with external controller
    • Throttle position sensor
    • On/off fast idle valve
    • 2 injector output channels
    • Tach input – Hall effect, optical, or VR sensors supported
    • Single direct coil control spark output

Does this kit include a MAP sensor?

  • Yes, there is a 2.5 bar MAP sensor included. It is a small UFO-like item in a static resistant bag and will not look like a conventional GM MAP sensor.

When should I use a V2.2 board, and when is it worth stepping up to a V3.0?

  • The V3.0 is significantly more flexible. For a new build, a V2.2 could be cost effective under the following conditions:
    • You will be running high impedance injectors.
    • You will be using fuel control only, or one of the following ignition systems:
      • Ford TFI
      • Ford EDIS
      • GM HEI
      • VW Hall effect distributor and “139” ignition module
    • You do not need any other outputs beyond fuel and ignition control.
    • You do not intend to upgrade to MS2 or MS3 in the future.
  • If your plans include any features beyond this, starting with a V3.0 is likely to be a better option.

What firmware does it have?

  • The processor ships with Bowling & Grippo V3.0 code. It is easy to upgrade to MS1/Extra code during assembly.

Questions & Answers

  1. 0 votes
    A

    I would recommend stepping up to an MS2 V3.0 instead; the MS2 will add support for the stepper IAC valve and be considerably easier to tune. The MegaSquirt ignores the anti-theft system and can take over fuel and ignition control on this car.

  2. 0 votes
    A

    You can use the MS1 V3.0 as a fuel only control here; however, upgrading to an MS2 V3.0 would let you add spark control in one box. Same goes for a MicroSquirt - you could even use a pair of QuadSpark ignition modules and would not need LS1 coils.

  3. 0 votes
    A

    We have a step by step guide to checking the injector circuits on these boards here:

    Bench testing the MegaSquirt injector drivers

  4. 0 votes
    A

    I recommend running MS1/Extra 029y4 on this unit. See the MS1/Extra manual for details.

You may also like…

  • MS Harness Extra Wire Kit

    $3.49

    This 8' wire with pre-crimped terminal can be poked into our MegaSquirt DB37 harness if an extra wire is needed for additional I/O (MSHarness12, available separately).  Made of the same TXL rated automotive grade wiring as the rest of our MegaSquirt wiri...

    Add to cart
  • JimStim v1.5 MegaSquirt Stimulator with Wheel Simulator – Unassembled

    4.7 out of 5
    $80.00

    Use this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...

    Add to cart
  • 8′ MegaSquirt Wiring Harness (MS1/MS2/MS3 Ready)

    5 out of 5
    $83.00

    MegaSquirt Wiring Harness - 8 Feet Long We've completely redesigned our wire harness to help you get your fuel injection installation right the first time with several new features to help make your installation as easy and reliable as possible: ...

    Add to cart