Cart

Quick Links

MS3Pro LSX 24x Drop On Plug and Play Harness
MS3Pro LSX 24x Drop On Plug and Play Harness
MS3Pro ULTIMATE with GM LS 24x Plug and Play Harness
MS3Pro 'Drop On' 24x LS Plug and Play Harness w/ ECU-1st Gen
MS3 Pro EFI/EMS by DIYAutoTune

MS3Pro ‘Drop On’ 24x LS Plug and Play Harness w/ ECU-1st Gen

5 out of 5 based on 2 customer ratings
(2 customer reviews)

From: $1,699.00

PRODUCT DISCONTINUED

Product Quantity
1

Alternator Lead Extension

1

MicroSquirt CAN Transmission Controller with 4L60E Subharness

1

MicroSquirt CAN Transmission Controller with 4L80E Subharness

1

Out of stock

SKU: MS3Pro-PKG-24x Category: Brand:

Description

For MS3Pro 1st Gen plug and play installation on GM LS engines with a 24x crank trigger.

The MS3Pro 24x LS Plug and Play Harness is the highest quality, best value option for LS Motors in the industry today.  Save your hard earned time and money while experiencing the virtually limitless feature set of MS3Pro 1st Gen Engine Management System.  Simply choose your injector style from the drop down menu!

This package includes an MS3Pro 1st Gen ECU

The MS3Pro LSX Series plug and play harness is professionally engineered and easy to install.  Fire up your engine on day one!   All wiring is composed of TechFlex woven, self-extinguishing wrapped hi-temp TXL & GXL automotive grade wire with OEM Delphi & TE connectors. Reach the battery under the hood or in the trunk with 4 gauge power & 10 gauge ground wires.  All relays and fusing live in a single, waterproof fusebox and the fuel pump wiring / relays / fusing is big enough for pumps that can handle 1000whp or more right out of the box (10ga wire, 30amp circuit).  Additionally, all of the available I/O of the MS3Pro are brought out in the harness to make expansion as easy as possible regardless of the featureset you’re planning to use, allowing for killer features like traction control, bump box, table switching, flex fuel, and more.  This harness was designed with room to grow!  And did we mention it’s show-quality-drop-dead-gorgeous?

This harness also is designed for optional automatic transmission control using our AMP EFI transmission controller and proper sub-harness (for 4L60E or 4L80E) and you’re ready to control your trans!

Required connections:
Constant Power
Constant Ground
Switched Power
Starter
Alternator light

Suggested extra connections:
Fuel Pump Power
Tachometer Signal

Note that the alternator connection is designed for high mount alternators such as Corvette and truck setups. Low mount alternator setups such as Camaro, Firebird, CTS-V, and GTO accessory brackets, as well as other aftermarket accessory drives that do not have the alternator high on the driver’s side, require our alternator extension cable.

PLEASE VISIT OUR DOCUMENTATION & DOWNLOADS TABS for complete documentation and base tunes.

*All parts are sold for OFF ROAD RACE-ONLY, ground-vehicle use only. Aftermarket EFI/EMS systems are not for sale or use on pollution controlled vehicles. Alteration of emission related components constitutes tampering under the US EPA guidelines and can lead to substantial fines and penalties. Your state/district may also have specific rules restricting your tampering with your vehicle’s emissions system. In short, as stated before, our official policy has to be RACE or OFFROAD USE-ONLY in ground based vehicles ONLY.

Customer reviews

Rated 5 out of 5 stars
2 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

2 reviews for MS3Pro ‘Drop On’ 24x LS Plug and Play Harness w/ ECU-1st Gen

Only logged in customers who have purchased this product may write a review.

LS1 big cam base tune [zip]

Drivers for the USB connection can be found on the FTDI website.

The latest firmware & tuning software, as well as previous release archive, can always be accessed at https://www.ampefi.com/downloads/

Compare MS3Pro 1st Generation, EVO & ULTIMATE System I/O and Features

What is in the box?

    • MS3-Pro Standalone EFI Controller
    • LSx drop on wiring harness
    • Fuse block with relays
    • USB and serial communications cables
    • Matching connectors for O2 and transmission / CAN subharness
    • Fuel pump ground wire
    • Includes TunerStudio registration code
    • USB drive (for software / documentation / base maps)

How big is the ECU?

    • The MS3-Pro measures approximately 7″ long (including the mounting ears), 4″ wide, and 2″ tall including the mating connectors. Not including the connectors, the case itself is 1″ high.

Where is this product manufactured?

    • The ECU is manufactured in Suwanee, Georgia, USA. The wiring harness is also American-made.

What is the warranty on the MS3-Pro?

    • It carries a one year warranty against manufacturing defects.

How watertight is the box?

    • The case uses an o-ring seal and sealed connectors to ensure it is completely splashproof, and will keep water out if completely immersed up to a few inches for a few  minutes (which normally shouldn’t happen, right?).  If you need further water submersion resistance that can be accomplished with a small bead of silicone just inside/outside of the o-ring.

Will I need to modify the harness to fit the mods on my engine?

    • This harness works with car, truck, and most aftermarket intakes that use a forward facing throttle body. Intakes that use a center mounted throttle body, independent throttle bodies, or reverse mounted intakes (with the throttle facing the bellhousing) will require minor modification.
    • The alternator connection is set up for an alternator mounted high on the driver’s side, like the truck or Corvette accessory brackets. Setups that mount the alternator low (Camaro, Firebird, GTO, and CTS-V, for example, as well as many aftermarket setups) will need an extension. Our alternator extension harness provides a good way to add this.
    • We anticipate most customers won’t be using the factory O2 sensors. We have brought these out to an Amphenol AT connector for making your own O2 harness.

What size screws do I need for the fuse box mounting?

  • It uses #10-32 mounting screws.

Does this harness have the MS3-Pro controlling the alternator?

  • No. You will need to wire the alternator to the charge lamp. That will activate the alternator. See details in the manual.

Questions & Answers

    Do I have to purchase turner studios for this ?
  1. 0 votes
    Q Do I have to purchase turner studios for this ?
    Asked by Julius Bolden
    A

    No, we include the registered version of TunerStudio and MegaLogViewer with the MS3Pro. Just enter the MS3Pro's serial number at this link on the TunerStudio site to receive your registration code.

Only registered users are eligible to enter questions