Description
Included is the JimStim CPU. A microcontroller loaded with the latest code, currently V2.0.4.
Included is the JimStim CPU. A microcontroller loaded with the latest code, currently V2.0.4.
The JimStim CPU is not easy to test separately from the JimStim, but if the 3.3 volt supply is putting out the correct voltage, it should be safe to install a new processor. The most common cause I've seen of damaging the processor is if the JimStim is switched on while placed on a metal surface.
Google translation: Процессор JimStim нелегко тестировать отдельно от JimStim, но если источник питания напряжением 3,3 В подает правильное напряжение, он должен быть безопасным для установки нового процессора. Наиболее распространенной причиной, по которой я видел повреждение процессора, является то, что JimStim включен, когда он помещен на металлическую поверхность.
The regular JimStim can test the main board on your MS3. But what if you'd like to see the inputs and outputs on the MS3X expansion card in action, too? Now it's easy - just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 vo...
Add to cartBA05CC0T 5 volt regulator, used as a higher capacity replacement for LM2937ET-5.0-ND. U5 in both the V2.2 and V3.0 kits.
Add to cart12v DC Power Supply Plugs directly into your MegaSquirt JimStim Stimulator! Power supply supports 120 to 240 volt AC power.
Add to cartMegaSquirt-II Daughterboard For upgrading your Megasquirt-I ECU, or replacement of your damaged MegaSquirt-II daughterboard. MS2 daughter cards are for use only with genuine Bowling & Grippo MegaSquirt mainboard PCBs. This is the latest version o...
Add to cartThe TransStim simulates a 4L60E transmission, and several others. This is the bare PCB to make one TransStim. Use it to test your MegaShift or other transmission controller. The TranStim™ will help you to: Validate and troubleshoot a newly built...
Read moreUse this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car! The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...
Add to cart
Reviews
There are no reviews yet.