Description
Need to remove a pin from one of our assembled MegaSquirt harnesses? These little tools are what you need to release the pins from a D-Subminiature connector so you can pull the wire out.
$6.00
-
Need to remove a pin from one of our assembled MegaSquirt harnesses? These little tools are what you need to release the pins from a D-Subminiature connector so you can pull the wire out.
Only logged in customers who have purchased this product may write a review.
What sort of D-Sub connectors does this work with?
What are the two different ends for?
How do I use this to remove pins from my harness?
There are no questions yet, be the first to ask something for this product.
DIYAutoTune Part# JimStim-C JimStim is essentially an engine simulator, a microcontroller which allows the generates up to 30 different toothed wheel signals, in addition to the standard distributor signal. Test your RPM input on the Stim, or tell the ...
Add to cartAnti-Static ESD Protection Wrist Strap Protect your electronics from Electrostatic Discharge (ESD) during assembly or modification. Attach this wrist strap by connecting the clip to a good ground point and you'll safely discharge all static electricity...
Add to cart10-pack of wire jumpers in 5 colors. These fit 0.1" headers and are used on the JimStim to make connections for testing additional circuitry. There are several other uses for them too.
Add to cartWe've tracked down a source for a reliable, yet affordable, crimper for the Weather Pack connectors. This crimper is American made and truly creates a perfect crimp every time, without the price tag you'd usually pay for a Delphi 12014254 crimper. Th...
Add to cartNeed to crimp your Weather Pack connectors to heavier gauge wire? This one will crimp 10 and 12 gauge. Like our other tool, this is a quality, American made crimper. It doesn't have the holding block like on the smaller tool however, and it needs two sepa...
Add to cartThis tool makes de-pinning Weather Pack connectors a simple snap or poke. Just pop the seal retainer off, poke the tool in from the terminal side, slipping the tool over the terminal all the way in to release the latch, and pull the wire out from the...
Add to cart
1 review for D-Sub Connector Pin Removal Tool