For upgrading your Megasquirt-I ECU, or replacement of your damaged MegaSquirt-II daughterboard. MS2 daughter cards are for use only with genuine Bowling & Grippo MegaSquirt mainboard PCBs. This is the latest version of the MegaSquirt-II daughterboard with the C64 processor and is CAN-enabled. The latest embedded code can be found at the MS2/Extra downloads page.
You can install it as an upgrade, although the MS2 / V2.2 combination is not as well documented or up to date as the MS2 / V3.0 or MS2 / V3.57. See the MS2/Extra archive web manuals for notes about this combination.
Will this fit both a PNPMS2 as well as the generic DIY MS2 kit?
QWill this fit both a PNPMS2 as well as the generic DIY MS2 kit?
Asked by Ray
The MSPNP Gen 2 is based on the MicroSquirt Module and does not use an MS2 daughterboard.
Is the MS2 daughter board a kit, or assembled? And, is this MS2 extra? fuel and spark?
QIs the MS2 daughter board a kit, or assembled? And, is this MS2 extra? fuel and spark?
Asked by Mark
The daughter board is assembled and ready to drop onto a MegaSquirt main board. It ships without firmware but can be loaded with Bowling & Grippo code or MS2/Extra. Loading code can be done with an ordinary serial cable and a laptop, no special tools required, and takes about five minutes.
Only registered users are eligible to enter questions
Use this board to test the MegaSquirt's inputs and outputs on the bench, before you install it on a car!
The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor s...
This MSx30-Guts kit includes all the capacitors, diodes, integrated circuits, resistors, transistors, ECU connectors, the tube of heatsink compound and a bit of jumper wire in a Megasquirt V3.0 kit. The kit does not include the V3.0 PCB, case, endplates, ...
High Quality 4' Relay Board cable for connecting your MegaSquirt ECU to your Relay Board.
Works with MS1, MS2, or MS3, all standard main boards (includes not just the IAC and ignition pins - it also has the spare pins on 3 through 6). It has a shielded...
MegaSquirt-I CPU; Motorola 68HC908 microprocessor loaded with standard B&G MegaSquirt-I firmware version 3.0. This part is discontinued - sorry, we've sold out the whole stock.
For use with any MegaSquirt PCB version 1, 2.2, 3.0, 3.57...
7 reviews for CPU – MegaSquirt-II Daughterboard