Description
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Connect MS3Pro ULTIMATE or EVO directly to your laptop with this 4 pin M12 serial cable.
Both connectors are industry standard parts - the four pin connector is an M12 circular connector and the 9 pin connector is a D-subminiature. They're available from a variety of sources - Amphenol, Molex, Norcomp, Pheonix Contact, etc.
We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cartInnovate serial cable for the LC-1. Also can serve as a replacement serial cable for the VVTuner, MSPNP2-EEC4A8 or EEC4B8, and Microsquirt.
Add to cartReplacement M8 to DB9 serial cable. This cable is used for certain plug and play applications where there wasn't room for a regular DB9 connector, including the following: MS3Pro PNP for '84-'87 Buick Regal 3.8 Turbo MSPNP Gen 2 for '86-'93 Ford M...
Add to cartMaking your own harness? This plug and pin kit features the MS3Pro AMPSEAL white & gray connectors plus 75 pins- more than enough for making your own MS3Pro EVO or 1st Gen harness. MS3Pro ULTIMATE 3-connector AMPSEAL Kit available here
Add to cartThe MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cart
Reviews
There are no reviews yet.